Cisco 3002 - VPN Hardware Client Betriebsanweisung PDF herunterladen (Seite 59)

Configuration | System | Tunneling Protocols | IPSec

6-3

VPN 3002 Hardware Client User Guide

• Mode Configuration (also known as ISAKMP Configuration Method)

• Tunnel Encapsulation Mode

Figure 6-2: Configuration | System | Tunneling Protocols | IPSec screen

Peer Address

Enter the IP address or hostname of the remote IKE peer. This is the IP address or hostname of the public

interface on the VPN Concentrator to which this VPN 3002 connects. Use dotted decimal notation; e.g.,

192.168.34.56.

Use Certificate

This parameter specifies whether to use preshared keys or a PKI (Public Key Infrastructure) digital

identity certificate to authenticate the peer during Phase 1 IKE negotiations. See the discussion under

Administration | Certificate Management, which is where you install digital certificates on the VPN 3002.

Check the box to use digital certificates.

Group

The VPN 3002 connects to the VPN 3000 Series Concentrator using this Group name and password, which

must be configured on the central-site Concentrator. Group and user names and passwords must be identical

on the VPN 3002 and on the Concentrator to which it connects.

Name

In the Group Name field, enter a unique name for the group to which this VPN 3002 belongs. This is the

group name configured on the central-site Concentrator to which this VPN 3002 connects. Maximum is

32 characters, case-sensitive.

Password

In the Group Password field, enter a unique password for this group. This is the group password

configured on the Concentrator to which this VPN 3002 connects. Minimum is 4, maximum is 32

characters, case-sensitive. The field displays only asterisks.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 219 220

Keine Kommentare

Cisco 3002 - VPN Hardware Client Betriebsanweisung Seite 59