Cisco 3002 - VPN Hardware Client Betriebsanweisung Seite 48
- Seite / 220
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
3 Interfaces
3-4
VPN 3002 Hardware Client User Guide
If the interface is configured but disabled (offline), the appropriate Ethernet Link Status LED blinks green
on the VPN 3002 front panel.
IP Address
Enter the IP address for this interface, using dotted decimal notation (e.g., 192.168.12.34). Note that
0.0.0.0 is not allowed. Be sure no other device is using this address on the network.
Subnet Mask
Enter the subnet mask for this interface, using dotted decimal notation (e.g., 255.255.255.0). The
Manager automatically supplies a standard subnet mask appropriate for the IP address you just entered.
For example, the IP address
192.168.12.34 is a Class C address, and the standard subnet mask is
255.255.255.0. You can accept this entry or change it. Note that 0.0.0.0 is not allowed.
MAC Address
This is the unique hardware MAC (Medium Access Control) address for this interface, displayed in
6-byte hexadecimal notation. You cannot change this address.
Speed
Click the drop-down menu button and select the interface speed:
10 Mbps = Fix the speed at 10 megabits per second (10Base-T networks)
100 Mbps = Fix the speed at 100 megabits per second (100Base-T networks)
10/100 auto = Let the VPN 3002 automatically detect and set the appropriate speed, either 10 or 100
Mbps (default). Be sure that the port on the active network device (hub, switch, router, etc.) to
which you connect this interface is also set to automatically negotiate the speed. Otherwise, select
the appropriate fixed speed.
Duplex
Click the drop-down menu button and select the interface transmission mode:
Auto = Let the VPN 3002 automatically detect and set the appropriate transmission mode, either full
or half duplex (default). Be sure that the port on the active network device (hub, switch, router, etc.)
to which you connect this interface is also set to automatically negotiate the transmission mode.
Otherwise, select the appropriate fixed mode.
Full-Duplex = Fix the transmission mode as full duplex: transmits and receives at the same time.
Half-Duplex = Fix the transmission mode as half duplex: transmits or receives, but not at the same
time.
- VPN 3002 Hardware Client 1
- User Guide 1
- CONTENTS 3
- 5Servers 4
- 6 Tunneling 4
- 7IP Routing 4
- 8 Management Protocols 4
- 9 Events 4
- 10 General 5
- 11 Policy Management 5
- Contents—Table of contents 8
- Contents 9
- About this manual 11
- Additional documentation 12
- Obtaining documentation 13
- Documentation feedback 14
- Cisco.com 14
- Technical Assistance Center 14
- Other references 15
- Documentation conventions 16
- Data formats 16
- Filenames 17
- Port numbers 17
- Browser requirements 19
- Navigation toolbar 20
- Install SSL Certificate link 22
- Next to continue 24
- Security Alert screen 26
- Reinstallation 28
- First-time installation 28
- Title bar 37
- Status bar 37
- Mouse pointer and tips 38
- Top frame (Manager toolbar) 38
- Support 39
- Save Needed 39
- Main frame (Manager screen) 40
- Interfaces 45
- Subnet Mask 47
- MAC Address 48
- DHCP Client 49
- 3 Interfaces 50
- System Configuration 51
- Primary DNS Server 54
- Secondary DNS Server 54
- Tertiary DNS Server 54
- Timeout Period 55
- Timeout Retries 55
- Tunneling 57
- Peer Address 59
- Use Certificate 59
- IP Routing 61
- Static Routes 62
- Add / Modify / Delete 62
- Add or Modify 63
- Destination 64
- Add or Apply / Cancel 64
- Default Gateway 65
- Lease Timeout 66
- Address Pool Start/End 66
- DHCP Option 67
- Management Protocols 69
- Enable HTTP 70
- Enable Telnet 72
- Enable Telnet/SSL 72
- Telnet Port 72
- Telnet/SSL Port 72
- Maximum Connections 73
- Maximum Queued Requests 74
- SNMP Communities 75
- Communities 76
- Community String 77
- Encryption Protocols 78
- Client Authentication 79
- SSL Version 79
- Enable SSH 81
- Enable SSH on Public 81
- SSH Port 81
- Maximum Sessions 81
- Key Regeneration Period 81
- Event class 83
- (*Cisco-specific event class) 85
- Event severity level 86
- Event log 87
- Syslog Format 88
- Severity to Log 89
- Severity to Console 89
- Severity to Syslog 89
- Severity to Trap 89
- Configured Event Classes 90
- Class Name 91
- Trap Destinations 93
- Community 95
- Syslog Servers 96
- Syslog Server 97
- Facility 97
- System Name 100
- Location 100
- Apply / Cancel 100
- Current Time 101
- New Time 101
- Enable DST Support 101
- Policy Management 103
- Network Extension mode 104
- Traffic Management 105
- Management 106
- PAT 106
- Administration 109
- 12 Administration 110
- Current Software Revision 111
- Browse 111
- Upload / Cancel 111
- Software Update Progress 112
- Software Update Success 112
- Software Update Error 112
- Configuration 114
- When to Reboot/Shutdown 114
- Administration 115
- Error (Ping) 116
- Administrator 117
- Password 118
- Session Idle Timeout 119
- Session Limit 119
- Encrypt Config File 119
- View Files 120
- Swap Config Files 120
- Config File Upload 120
- OK / Cancel 121
- Local Config File / Browse 122
- File Upload Progress 122
- File Upload Success 123
- File Upload Error 123
- Common Name (CN) 125
- Organizational Unit (OU) 126
- Organization (O) 126
- Request Generated 128
- Certificate Type 129
- Certificate Password 130
- Local File / Browse 130
- Certificate Text 130
- Certificate Authorities 131
- Identity Certificates 131
- Subject / Issuer 131
- Expiration 132
- Actions/View/Delete 132
- Serial Number 133
- Signing Algorithm 133
- Yes / No 135
- Monitoring 137
- Monitoring 138
- Next Hop 139
- Interface 139
- Protocol 139
- Select Filter Options 140
- First Page 141
- Previous Page 141
- Next Page 141
- Last Page 141
- Get Log 142
- Clear Log 142
- Event log format 142
- Monitoring 144
- Monitoring 145
- 13 Monitoring 146
- Tunnel Established to: 147
- Duration: 147
- Security Associations: 147
- Front Panel 148
- Back Panel 148
- Monitoring 150
- IKE (Phase 1) Statistics 151
- IPSec (Phase 2) Statistics 154
- Max Connections 158
- Active Sessions 158
- Attempted Sessions 158
- Successful Sessions 158
- Monitoring 159
- Monitoring 160
- Monitoring 163
- Broadcast In 166
- Broadcast Out 166
- TCP Segments Received 166
- TCP Segments Transmitted 166
- -1 means there 167
- UDP Datagrams Received 168
- UDP Datagrams Transmitted 168
- UDP Errored Datagrams 168
- UDP No Port 168
- 0.0.0.0) and 169
- Total Received / Transmitted 171
- Errors Received / Transmitted 171
- Physical Address 174
- IP Address 174
- Mapping Type 174
- Action / Delete 174
- Alignment Errors 175
- FCS Errors 175
- Carrier Sense Errors 175
- Speed (Mbps) 177
- Requests Received 177
- Bad Version 177
- Bad Community String 178
- Parsing Errors 178
- Silent Drops 178
- Proxy Drops 178
- Accessing the CLI 179
- Starting the CLI 180
- Using the CLI 181
- Using shortcut numbers 182
- Using Back and Home 183
- Getting Help Information 184
- CLI menu reference 185
- Main menu 186
- 1 Configuration 186
- 2 Administration 188
- 2.3 Ping 189
- 3 Monitoring 192
- 3.2 Monitoring > Event Log 193
- Errors and troubleshooting 195
- LED indicators 196
- Errors on the system 197
- A Errors and troubleshooting 198
- Command Line Interface errors 204
- Ownership of the Software 205
- Grant of License 205
- Limited Warranty 206
- Other licenses 207
- DHCP client 208
- DNS Resolver (client) 208
- LZS221-C v6 210
- MPPC-C v4 210
- RSA software 211
- SecureID 211
- Server SNMP 211
- Client SNMP 212
- SSL Plus 212
- Telnet server 213
- CRSHDUMP.TXT file A-1 216
Verwandte Produkte und Handbücher für Vernetzung Cisco 3002 - VPN Hardware Client
Vernetzung Cisco WPC54GS Betriebsanweisung
(83 Seiten)
(83 Seiten)
Vernetzung Cisco 10700 Betriebsanweisung
(602 Seiten)
(602 Seiten)
Vernetzung Cisco ME 3800X Spezifikationen
(622 Seiten)
(622 Seiten)
Vernetzung Cisco Aironet 340 Series Spezifikationen
(362 Seiten)
(362 Seiten)
Vernetzung Cisco 867W Bedienungsanleitung
(59 Seiten)
(59 Seiten)
Vernetzung Cisco 7400 series Betriebsanweisung
(12 Seiten)
(12 Seiten)
Vernetzung Cisco 7576 Bedienungsanleitung
(26 Seiten)
(26 Seiten)
Vernetzung Cisco WRT610N Bedienungsanleitung
(3 Seiten)
(3 Seiten)
Vernetzung Cisco IPS 7.1 Installationsanleitung
(422 Seiten)
(422 Seiten)
Vernetzung Cisco SMTP Bedienungsanleitung
(3 Seiten)
(3 Seiten)
Vernetzung Cisco 815 Bedienungsanleitung
(8 Seiten)
(8 Seiten)
Vernetzung Cisco WRT54GC Betriebsanweisung
(83 Seiten)
(83 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.071 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern