Cisco 3002 - VPN Hardware Client Betriebsanweisung PDF herunterladen (Seite 50)

3 Interfaces

3-6

VPN 3002 Hardware Client User Guide

IP Address

Enter the IP address for this interface, using dotted decimal notation (e.g., 192.168.12.34). Note that

0.0.0.0 is not allowed. Be sure no other device is using this address on the network.

Subnet Mask

Enter the subnet mask for this interface, using dotted decimal notation (e.g., 255.255.255.0). The

Manager automatically supplies a standard subnet mask appropriate for the IP address you just entered.

For example, the IP address

192.168.12.34 is a Class C address, and the standard subnet mask is

255.255.255.0. You can accept this entry or change it. Note that 0.0.0.0 is not allowed.

MAC Address

This is the unique hardware MAC (Medium Access Control) address for this interface, displayed in

6-byte hexadecimal notation. You cannot change this address.

Speed

Click the drop-down menu button and select the interface speed:

10 Mbps = Fix the speed at 10 megabits per second (10Base-T networks)

100 Mbps = Fix the speed at 100 megabits per second (100Base-T networks)

10/100 auto = Let the VPN 3002 automatically detect and set the appropriate speed, either 10 or 100

Mbps (default). Be sure that the port on the active network device (hub, switch, router, etc.) to

which you connect this interface is also set to automatically negotiate the speed. Otherwise, select

the appropriate fixed speed.

Duplex

Click the drop-down menu button and select the interface transmission mode:

Auto = Let the VPN 3002 automatically detect and set the appropriate transmission mode, either full

or half duplex (default). Be sure that the port on the active network device (hub, switch, router, etc.)

to which you connect this interface is also set to automatically negotiate the transmission mode.

Otherwise, select the appropriate fixed mode.

Full-Duplex = Fix the transmission mode as full duplex: transmits and receives at the same time.

Half-Duplex = Fix the transmission mode as half duplex: transmits or receives, but not at the same

time.

Apply / Cancel

To apply your settings to this interface and include your settings in the active configuration, click Apply.

The Manager returns to the

Configuration | Interfaces screen.

Reminder: To save the active configuration and make it the boot configuration, click the

Save Needed icon at the

top of the Manager window.

To discard your settings, click

Cancel. The Manager returns to the Configuration | Interfaces screen.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 219 220

Keine Kommentare

Cisco 3002 - VPN Hardware Client Betriebsanweisung Seite 50