Cisco 12012 Technical Information PDF herunterladen (Seite 44)

Command Reference

Release 11.2 GS

show diag

To display hardware information including DRAM and SRAM on the line cards, use the show diag

privileged EXEC command.

show diag [slot-number] [details] [summary]

Syntax Description

Command Mode

Privileged EXEC

Usage Guidelines

This command was modiﬁed in Cisco IOS Release 11.2 GS to include sample output from the

Cisco 12000 series Gigabit Switch Routers.

Use this command to determine the type of hardware installed in your router.

Sample Display

The following is sample output from the show diag command:

Router# show diag 3

SLOT 3 (RP/LC 3 ): 4 Port Packet Over SONET OC-3c/STM-1 Multi Mode

MAIN: type 33, 00-0000-00 rev 70 dev 0

HW config: 0x01 SW key: 00-00-00

PCA: 73-2147-02 rev 94 ver 2

HW version 1.0 S/N 04499695

MBUS: MBUS Agent (1) 73-2146-05 rev 73 dev 0

HW version 1.1 S/N 04494882

Test hist: 0x00 RMA#: 00-00-00 RMA hist: 0x00

DIAG: Test count: 0x05000001 Test results: 0x00000000

MBUS Agent Software version 01.27 (RAM) using CAN Bus A

ROM Monitor version 00.0D

Fabric Downloader version used 00.0D (ROM version is 00.0D)

Board is analyzed

Board State is Line Card Enabled (IOS RUN )

Insertion time: 00:00:10 (00:04:51 ago)

DRAM size: 33554432 bytes

FrFab SDRAM size: 67108864 bytes

ToFab SDRAM size: 16777216 bytes

Router#

slot-number (Optional) Slot number of the interface.

details (Optional) Displays more details than the normal show diag

output.

summary (Optional) Displays a summary (one line per slot) of the chassis.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 59 60

Keine Kommentare

Cisco 12012 Technical Information Seite 44