Cisco 1710 Spezifikationen PDF herunterladen (Seite 37)

2-7

Cisco 1710 Security Router Software Configuration Guide

78-12696-01

Chapter 2 Cisco 1710 Security Router Configuration

Configuring the Ethernet Interfaces

Configure the Ethernet interfaces by performing the following tasks. Begin in the

global configuration mode.

Step 6

dialer-group 1 Assign this interface to a dialer list.

Step 7

ppp authentication chap Optional. Set the PPP authentication method

to Challenge Handshake Authentication

Protocol (CHAP).

Step 8

exit Exit Dialer 0 interface configuration.

Command Task

Step 1

interface Ethernet 0 Configure the Ethernet interface.

Step 2

ip address ip-address subnet-mask Set the IP address and subnet mask for the

Ethernet 0 interface.

Step 3

ip nat outside Optional. Establish the Ethernet interface as

the outside interface.

Step 4

exit Exit Ethernet 0 interface configuration.

Step 5

crypto map name Apply crypto map to the Ethernet interface.

Step 6

interface FastEthernet 0 Configure the Fast Ethernet interface.

Step 7

ip address ip-address subnet-mask Set the IP address and subnet mask for the

Fast Ethernet interface.

Step 8

ip nat inside Optional. Establish the Fast Ethernet

interface as the inside interface.

Step 9

pppoe enable Optional. Enable PPPoE as protocol.

Step 10

pppoe-client dial-pool-number 1 Optional. Create the PPPoE dial pool.

Step 11

exit Exit Fast Ethernet 0 interface configuration.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 87 88

Keine Kommentare

Cisco 1710 Spezifikationen Seite 37