Cisco UCS C460 Bedienungsanleitung PDF herunterladen (Seite 46)

Cisco UCS C460 M2 High-Performance Rack-Mount Server

SUPPLEMENTAL MATERIAL

CPUs and DIMMs

Physical Layout

Each CPU controls four serial memory interface (SMI) channels (see Figure 5 on page 14). There is one

memory riser for every two channels. There are therefore two memory risers per CPU. Each CPU channel

drives a memory buffer on a riser card, and each memory buffer converts a CPU SMI into two DDR3

subchannels that each read and write two DIMM pairs on a memory riser.

The physical layout of a memory riser is shown in Figure 9.

Figure 9 Memory Riser Physical Layout

In Figure 9, the buffers and channels are:

■ Buffer 1, subchannel 1: slots 1B and 1D

■ Buffer 1, subchannel 2: slots 1A and 1C

■ Buffer 2, subchannel 1: slots 2B and 2D

■ Buffer 2, subchannel 2: slots 2A and 2C

Memory Population Rules

When considering the memory configuration of your server, you should observe the following:

■ The minimum configuration for the server is at least one matched DIMM pair installed in a

memory riser on either CPU1 or CPU2 All four CPUs can run from a single DIMM pair.

■ DIMMs are required to be populated in pairs. DIMMs for this server are configured as

two-DIMM kits.

1 Memory buffer #1 2 Memory buffer #2

199466

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52 53 54

Keine Kommentare

Cisco UCS C460 Bedienungsanleitung Seite 46