
9-15
Cisco PIX Firewall and VPN Configuration Guide
78-15033-01
Chapter 9 Accessing and Monitoring PIX Firewall
Managing the PIX Firewall Clock
Managing the PIX Firewall Clock
This section describes how to manage the PIX Firewall system clock and includes the following topics:
• Viewing System Time, page 9-15
• Setting the System Clock, page 9-15
• Setting Daylight Savings Time and Timezones, page 9-15
Viewing System Time
To view the current system time, enter the following command:
show clock [detail]
This command displays the system time. The detail option displays the clock source and the current
summer-time setting. PIX
Firewall Version 6.2 and higher provides milliseconds, timezone, and day.
For example:
16:52:47.823 PST Wed Feb 21 2001
Setting the System Clock
To set the system time, enter the following command:
clock set hh:mm:ss month day year
Replace hh:mm:ss with the current hours (1-24), minutes, and seconds. Replace month with the first
three characters of the current month. Replace day with the numeric date within the month (1-31), and
replace year with the four-digit year (permitted range is 1993 to 2035).
Setting Daylight Savings Time and Timezones
PIX Firewall Version 6.2 and higher also provides enhancements to the clock command to support
daylight savings (summer) time and time zones.
To configure daylight savings (summer) time, enter the following command:
clock summer-time zone recurring [week weekday month hh:mm week weekday month hh:mm
[offset]]
The summer-time keyword automatically switches to summer time (for display purposes only).
clock offset Offset of the system clock to synchronized peer.
root delay Total delay along path to root clock.
root dispersion Dispersion of root path.
peer dispersion Dispersion of synchronized peer.
Table 9-3 Output Description from ntp status Command (continued)
Output Column Heading Description
Kommentare zu diesen Handbüchern