Cisco UCS-CPU-E52403B= Datenblatt PDF herunterladen (Seite 44)

Cisco UCS B22 M3 Blade Server

SUPPLEMENTAL MATERIAL

B22 M3 Configured with 1 CPU

In a B22 M3 configured with 1 CPU, the mezzanine card slot (adapter 2 slot) is not under the control of a

CPU (in a B22 M3 configured with 2 CPUs, CPU 2 controls the adapter 2 slot). Therefore, in this

configuration, no adapter is supported in the adapter 2 slot and the VIC 1240 is always required to be

installed in the adapter 1 slot.

Connectivity using the Cisco UCS 2208XP Fabric Extender

The Cisco UCS 2208XP is the second-generation Fabric Extender, and shares the same form factor as the

current UCS 2100 series. The 2208XP is backwards compatible with the UCS 5108 Blade serve chassis.

The option shown in Figure 11 demonstrates how a 1-CPU server is connected to the Cisco UCS 2208XP. Two

ports from the VIC 1240 are channeled to 2208XP Fabric Extender A and two are channeled to 2208XP Fabric

Extender B. The result is 20 Gbps of bandwidth to each Fabric Extender.

Figure 11 VIC 1240 to UCS 2208XP Fabric Extender (no mezzanine adapter)

Connectivity using the Cisco UCS 2204XP Fabric Extender

The Cisco UCS 2204XP is a second-generation Fabric Extender, and shares the same form factor as the

current UCS 2100 series. The 2204XP is backwards compatible with the UCS 5108 Blade serve chassis.

The option shown in Figure 12 demonstrates how a 1-CPU server is connected to the Cisco UCS 2208XP. One

port from the VIC 1240 is channeled to 2204XP Fabric Extender A and one is channeled to 2204XP Fabric

Extender B. The result is 10 Gbps of bandwidth to each Fabric Extender.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 53 54

Keine Kommentare

Cisco UCS-CPU-E52403B= Datenblatt Seite 44