Cisco WRT300N Bedienungsanleitung PDF herunterladen (Seite 4)

CCNA Exploration

LAN Switching and Wireless: Basic Wireless Concepts and Configuration Lab 7.5.2 Challenge Wireless Configuration

hostname R1

no ip domain-lookup

enable secret Cisco

interface FastEthernet0/1

no shutdown

interface FastEthernet0/1.1

encapsulation dot1 1

ip address 172.17.1.1 255.255.255.0

interface FastEthernet0/1.10

encapsulation dot1 10

ip address 172.17.10.1 255.255.255.0

interface FastEthernet0/1.20

encapsulation dot1 20

ip address 172.17.20.1 255.255.255.0

interface FastEthernet0/1.88

encapsulation dot1 88

ip address 172.17.88.1 255.255.255.0

interface Loopback 0

ip address 10.1.1.1 255.255.255.252

line con 0

exec-timeout 0 0

logging synchronous

password cisco

Task 2: Configure Switch Interfaces

Configure switch hostnames on S1, S2, and S3. Set the switches to transparent, clear the VLAN

information, and create VLANs 10, 20, and 88.

hostname [S1, S2, S3]

vtp mode transparent

no vlan 2-1001

vlan 10,20,88

Step 1: Configure switch port interfaces on S1, S2, and S3.

Configure the interfaces on the S1, S2, and S3 switches with the connections from topology diagram.

Configure connections between two switches configure trunks.

Configure connections to a wireless router as access mode for VLAN 88.

Configure S2’s connection to PC1 in VLAN 10 and PC2’s connection in VLAN 20.

1 2 3 4 5 6 7 8 9 ... 27 28

Keine Kommentare

Cisco WRT300N Bedienungsanleitung Seite 4