Cisco WRT300N Bedienungsanleitung PDF herunterladen (Seite 10)

CCNA Exploration

LAN Switching and Wireless: Basic Wireless Concepts and Configuration Lab 7.5.2 Challenge Wireless Configuration

Step 3: Configure the Network Setup IP address to 172.17.30.1.

Step 4: Save the settings.

Click Save Settings. You are prompted to click Continue. Since you are connected wirelessly, you will

not be redirected to the new URL of the web utility (

http://172.17.30.1).

In order for the new IP address changes to take place, the PC has to release its old IP address and

dynamically acquire a new one from the 172.17.30.0/24 network.

Step 5: Release the old Network Setup IP Address

In command prompt, use the command ipconfig /release to release the current DHCP address. To get a

new IP address in the new network, issue the command ipconfig /renew. A new IP address should be

pulled from the 172.17.30.0/24 network.

Step 6: View the PC IP configuration settings.

Go to command prompt and use the command ipconfig. If the address has not been updated to the

172.17.30.0/24 network, it will be necessary to release and renew the IP address on the client.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Keine Kommentare

Cisco WRT300N Bedienungsanleitung Seite 10