Cisco WAP200 - Small Business Wireless-G Access Point Spezifikationen PDF herunterladen (Seite 30)

Configuring the WAP200 Access Point

Configuring Wireless Settings

Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 24

STEP 3 To automatically configure the time settings so that the access point obtains the

time from a public time server:

a. Click Automatically.

b. Select a time zone from the Time Zone drop-down menu.

c. If you are using the access point in a location that observes daylight saving

time, check the Automatically adjust clock for daylight saving changes

check box.

d. To use a local NTP server, click Enabled. The default is Disabled.

In the NTP Server IP field, enter the IP address of your NTP Server.

STEP 4 Click Save.

Configuring Wireless Settings

This section describes how to configure the wireless settings of the access point:

• Configuring Basic Settings, page 25

• Configuring Security, page 27

• Configuring Connection Control, page 43

• Configuring Advanced Settings, page 45

• Configuring VLAN & QoS, page 48

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 94 95

Keine Kommentare

Cisco WAP200 - Small Business Wireless-G Access Point Spezifikationen Seite 30