Cisco NM-16ESW - EtherSwitch Switch Bedienungsanleitung PDF herunterladen (Seite 75)

Configuring the Cisco Gigabit EtherSwitch EHWIC

How to Configure Gigabit EtherSwitch EHWICs

Configuring the Cisco Gigabit EtherSwitch EHWIC

OL-23155-01

Verifying Aging-Time Configuration

Use the show mac-address-table aging-time command to verify the configuration:

Router#show mac-address-table aging-time

Mac address aging time 300

Router#

Removing Dynamic Addresses

Beginning in privileged EXEC mode, follow these steps to remove a dynamic address entry.

SUMMARY STEPS

1. configure terminal

2. no mac-address-table dynamic hw-addr

3. end

DETAILED STEPS

Step 2

mac-address-table aging-time seconds

Example:

Router(config)#mac-address-table

aging-time 300

Enters the number of seconds that dynamic addresses are to be

retained in the address table. Valid entries are from 10 to 1000000.

Note The aging timer may be configured from 10 to 630, in

10-second intervals.

Step 3

end

Example:

Router(config)#end

Returns to privileged EXEC mode.

Command Purpose

Step 1

configure terminal

Example:

Router(config)#configure terminal

Enters global configuration mode.

Step 2

no mac-address-table dynamic hw-addr

Example:

Router(config)#no mac-address-table

dynamic 001e.4a96.b8cd

Enters the MAC address to be removed from dynamic MAC address

table.

Step 3

end

Example:

Router(config)#end

Returns to privileged EXEC mode.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco NM-16ESW - EtherSwitch Switch Bedienungsanleitung Seite 75

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco NM-16ESW - EtherSwitch Switch