Cisco NM-16ESW - EtherSwitch Switch Bedienungsanleitung PDF herunterladen (Seite 68)

Configuring the Cisco Gigabit EtherSwitch EHWIC

How to Configure Gigabit EtherSwitch EHWICs

Configuring the Cisco Gigabit EtherSwitch EHWIC

OL-23155-01

• Enabling Switch Port Analyzer, page 72

• Managing the ARP Table, page 73

• Managing the MAC Address Tables, page 73

• Removing Dynamic Addresses, page 75

• Adding Secure Addresses, page 76

• Configuring Static Addresses, page 77

• Clearing MAC Address Tables, page 78

• Configuring Port Security, page 78

Adding Trap Managers

A trap manager is a management station that receives and processes traps. When you configure a trap

manager, community strings for each member switch must be unique. If a member switch has an IP

address assigned to it, the management station accesses the switch by using its assigned IP address.

By default, no trap manager is defined, and no traps are issued.

Beginning in privileged EXEC mode, follow these steps to add a trap manager and community string.

SUMMARY STEPS

1. configure terminal

2. snmp-server host {hostname | ip-address} traps version 1 community string

3. end

DETAILED STEPS

Command Purpose

Step 1

configure terminal

Example:

Router#configure terminal

Enters global configuration mode.

Step 2

snmp-server host {hostname | ip-address}

traps version 1 community string

Example:

Router(config)#snmp-server host

172.2.128.263 traps version 1 snmp

vlan-membership

Enters the trap manager IP address, community string, and traps to

generate.

Step 3

end

Example:

Router(config)#end

Returns to privileged EXEC mode.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco NM-16ESW - EtherSwitch Switch Bedienungsanleitung Seite 68

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco NM-16ESW - EtherSwitch Switch