Cisco H.323/SIP Technical Information PDF herunterladen (Seite 86)

Polycom® Unified Communications Deployment Guide for Cisco Environments

3 Configure a Rule Name that is meaningful for your deployment, and select parameters

that are specific to the call routing for your environment.

a From the Target dropdown, select the Neighbor Zone configured in Task 1.

b If a numeric prefix defines endpoints registered to the DMA system, select a Mode of

Alias pattern match, Pattern type of Prefix, and then enter a Pattern string. The

example below forwards calls to extensions beginning with 72 to the Polycom DMA

system.

Task 3: Verify Bandwidth Configuration and Restrictions (Optional)

To be complete, check with the VCS administrator to confirm the Bandwidth limit settings in

VCS.

To verify bandwidth configuration and restrictions:

1 From the VCS web administration pages, select VCS Configuration > Bandwidth >

Configuration.

2 Verify the Default call bandwidth.

3 From the VCS web administration pages, select VCS Configuration > Local Zone >

Subzones.

4 For endpoints in subzones or sites that will be accessing this integration, ensure any

subzone bandwidth restrictions allow for bandwidths expected by the solution.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 94 95

Keine Kommentare

Cisco H.323/SIP Technical Information Seite 86