Cisco 828 Installationsanleitung PDF herunterladen (Seite 7)

Cisco 828 Router and SOHO 78 Router Cabling and Setup Quick Start Guide

78-12839-01

Set Up the Router to Access the Network

Figure 6 Connecting the Power Supply

Set Up the Router to Access the Network

The Cisco Router Web Setup (CRWS) software is already loaded on the Cisco 828 router or SOHO 78

router. You can use CRWS to configure the Cisco 828 router and the SOHO 78 router. If you purchased

your router through an Internet service provider (ISP), it is possible that your router has been configured

for use at your site. If you know this is not the case, or if you have purchased Cisco IOS software for the

router since installing it, we recommend that you use CRWS to configure the router.

Step 1 Log on to one of the PCs connected to the router through Ethernet port 1, 2, 3, or 4.

Step 2 Open a web browser.

Step 3 Type in the following universal resource locator (URL):

http://10.10.10.1

Step 4 Click the Router Setup link in the Cisco Router Web Setup home page, and follow the instructions that

appear in the page that is displayed.

Step 5 If the web page does not appear when you enter the URL http://10.10.10.1, test the connection between

the PC and the router by doing the following:

a. Check that the OK LED on the router is on, and check the cable connection between the router and

the PC. If the PC you are using is connected to Ethernet port number 4, be sure that the TO HUB/TO

PC button is in the TO PC position.

b. If the web page still does not appear, verify that your PC is automatically configured to receive an

IP address, by following the instructions in Cisco Router Web Setup User Guide, which is available

on the Cisco 800 and SOHO Series Product Documentation CD.

+5 VDC

ETHERNET 10 BASE T

CONSOLE

G.SHDSL

TO HUB

TO PC

Model Cisco 828

56639

2. Connect power

supply cable.

Cisco 828 router

1. Press power switch to standby ( ).

5. Press power switch to on ( ).

Desktop power supply

4. Connect other end

of power cord to

electrical outlet.

3. Connect power cord

to power supply.

1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco 828 Installationsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco 828