Cisco 828 Installationsanleitung PDF herunterladen (Seite 3)

Cisco 828 Router and SOHO 78 Router Cabling and Setup Quick Start Guide

78-12839-01

Connecting Cables to the Router

Connecting a Hub

This section describes how to connect a hub to the router Ethernet 4 port.

The TO HUB/TO PC button identifies the device that you connect to the yellow Ethernet 4 port, using

the yellow Ethernet cable. For example, setting the button to the TO HUB position (in) indicates that you

are connecting a hub; setting the button to the TO PC position (out) indicates that you are connecting a

server, PC, or workstation. For information on how the settings of this button on a hub can affect the

setting of this router, refer to the Cisco 828 Router and SOHO 78 Router Hardware Installation Guide.

You can use the yellow Ethernet cable to connect a server, PC, or workstation to any of the four Ethernet

ports. However, if you want to connect a hub to a port other than the ETHERNET 4 port, you must use

a crossover cable, which is not included with the router.

To connect a hub to the router, follow the steps in Figure 2.

Figure 2 Connecting a Hub

Note To connect a hub to an Ethernet port other than the ETHERNET 4 port, you must use a crossover

cable, which is not included with your router.

56634

Cisco 1528 Micro Hub 10/100

Cisco 828 router

2. Connect yellow cable

to ETHERNET 4 port

on Cisco 828 or

SOHO 78 router.

1. Set TO HUB/TO PC button.

MDI MDI-X

6X 7X 8X

1X 2X 3X 4X

ETHERNET

SPEED

100BaseTX

10BaseT

LED

SOLID

BLINK

3. Connect other

end of cable

to hub.

4. If applicable, check

setting of hub

equivalent of router

TO HUB/TO PC button.

+5 VDC

ETHERNET 10 BASE T

CONSOLE

G.SHDSL

TO HUB

TO PC

Model Cisco 828

1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco 828 Installationsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco 828