Cisco 4430 Bedienungsanleitung PDF herunterladen (Seite 5)

3-5

Cisco Content Routing Software Configuration Guide and Command Reference

78-12685-01

Chapter 3 Maintaining the Content Routing Software

Recovering the Software

Console IO Initialized

Attaching network interface lo0... done.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

Rights clause at FAR sec. 52.227-19 and subparagraph

Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Content Router

Software Release: CR ver 1.1 (Build: #01 08/30/2001)

Compiled: 18:09:47 Mar 26 2001 by morlee

Image text-base 0x108000, data_base 0x42bea4

System restarted by Power Up

The system has been up for 0 seconds.

System booted from fei

SVCINIT - phase complete

Initializing SCSI interface...

Initializing SCSI controller...

Configuring SCSI peripherals...

ID LUN VendorID ProductID Rev. Type Blocks BlkSize pScsiPhysDev

-- --- -------- ---------------- ---- ---- -------- -------

0 0 QUANTUM VIKING II 9.1SCA 4110 0 17836668 512 0x00fc9458

DEVINIT - phase complete

FSINIT - phase complete

Configuring from NVRAM...

%% Non-volatile configuration memory has not been set up

CONF - phase complete

NTP: Waiting (2 minutes) for network initialization

START - phase complete

Step 4 Reconfigure the Content Router with the basic network settings. You can modify the system

configuration later using the command-line interface (CLI).

---- System Configuration Dialog ----

You may use Ctrl-D to abort Configuration Dialog at any prompt.

Would you like to enter the initial configuration? [yes]: y

host name: myContent

domain name: myfirm.com

admin password: iforget

cache IP address: 1.1.1.1

IP network mask: 255.255.230.2

gateway IP address:10.10.10.10

DNS server:yo

If the basic configuration is acceptable, enter yes. The Content Router indicates whether the

configuration is accepted. At this point, the basic configuration is finished.

Use this configuration? [yes]: yes

Building configuration...

. . START - phase complete

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco 4430 Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco 4430