Cisco 3800 Series Spezifikationen PDF herunterladen (Seite 27)

in the online Cisco 3800 series hardware installation documentation at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/3800/hw/index.htm

Startup messages appear in your terminal emulation program window. After Cisco IOS software has finished booting,

the SYS LED for both routers is steady green, and the SYS PWR1 LED or SYS PWR2 LED on the Cisco 3845 chassis

is steady green.

Caution Do not press any keys on the keyboard until the messages stop and the SYS LED is steady green. Any keys pressed

during this time are interpreted as the first command typed when the messages stop, which might cause the router

to power off and start over. It takes a few minutes for the messages to stop.

Verify the Front Panel LED Indications

The indicator LEDs described in Table 4 provide power, activity, and status information:

Table 5 Cisco 3800 Series LED Indicators

LED

Cisco

3825

Router

Cisco

3845

Router Color and State Meaning

SYS Front Front Off Router not receiving power

Steady green Normal operation

Blinking green Booting or in ROM monitor mode

Amber Powered but malfunctioning

ACT Front Front Off No packet activity

Steady or

blinking green

Packet activity

SYS PWR Front — Off Router not receiving power

Steady green Normal operation

RPS Front — Off Connected to primary power system

Steady green Connected to redundant power system

SYS PWR1 — Front Off Power system 1 not present

Steady green Present and enabled

Amber Present and malfunctioning

SYS PWR2 — Front Off Power system 2 not present

Steady green Present and enabled

Amber Present and malfunctioning

AUX PWR Front — Off IP phone power off

Steady green Normal operation

Amber Powered but malfunctioning

AUX PWR1 — Front Off IP phone power system 1 not present

Steady green Present and enabled

Amber Powered but malfunctioning

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Keine Kommentare

Cisco 3800 Series Spezifikationen Seite 27