Cisco 2513 Spezifikationen Seite 136
- Seite / 138
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
2-14 Cisco 2500 Series Multiport Serial Router User Guide
Network Connection Considerations
You must use a special serial cable to connect a multiport serial router to a modem or
CSU/DSU. This cable is available from Cisco and is usually ordered with the system. The
cable uses a DB-60 connector on the chassis end. See the appendix “Cisco Multiport Router
Cable Specifications” for cable pinouts. For ordering information, contact a customer
service representative.
BRI Connections
On models with a Basic Rate Interface (BRI) port, the BRI port is an RJ-45 8-pin connector
located between the UTP and console ports on the Cisco 2520 and Cisco 2521, or between
the 10BT and console ports on the Cisco 2522 and Cisco 2523. Use an appropriate cable to
connect the system directly to the Integrated Services Digital Network (ISDN) through the
NT1. The common carrier will provide the NT1 connection worldwide, except in North
America, where the NT1 is customer owned.
Warning Network hazardous voltages are accessible in the BRI cable. If you detach the
BRI cable, detach the end away from the multiport serial router first to avoid possible
electric shock. Network hazardous voltages also are accessible on the system card in the
area of the BRI port (RJ-45 connector), regardless of whether power is turned off. (To see
translated versions of this warning, refer to the appendix “Translated Safety Warnings.”)
Warning The ISDN connection is regarded as a source of voltage that should be
inaccessible to user contact. Do not attempt to tamper with or open any public telephone
operator (PTO)-provided equipment or connection hardware. Any hardwired connection
(other than by nonremovable, connect-one-time-only lug) must be made only by PTO staff
or suitably trained engineers. (To see translated versions of this warning, refer to the
appendix “Translated Safety Warnings.”)
- About This Guide 1
- Organization 2
- Conventions 2
- Overview of the Router 5
- Hardware Features 6
- Overview of the Router 1-3 7
- Overview of the Router 1-5 9
- System Specifications 10
- Obtaining Service and Support 11
- Cisco Connection Online 12
- Ordering Documentation 13
- ISDN Connections 21
- DTE or DCE 22
- Signaling Standards 24
- Router connections 25
- EIA/TIA-449 V.35 X.21 25
- EIA/TIA-232 EIA-530 25
- EIA/TIA-232 Connections 26
- EIA/TIA-449 Connections 26
- V.35 Connections 27
- X.21 Connections 28
- Where to Go Next 31
- Installing the Router 33
- Required Tools and Equipment 34
- Setting Up the Chassis 35
- Rack-Mounting the Chassis 37
- Wall-Mounting the Chassis 39
- TOKEN RING 41
- DC Power Specifications 42
- Wiring the DC Power Supply 43
- Input: –40– –72V 44
- Current: 1.5–1.0A 44
- Watts: 40W 44
- Connecting to a Network 45
- Installing the Router 3-17 49
- AUX SER 0 ETH 51
- Installing the Router 3-21 53
- Configuring the Router 55
- Configuring the Router 4-3 57
- Configuring the Router 4-5 59
- Configuring the Router 4-9 63
- Configuring the Router 4-11 65
- Using Configuration Mode 66
- Using AutoInstall 67
- Cisco IOS Software Basics 68
- Saving Configuration Changes 71
- Configuring ISDN 72
- SPID_no [LDN] 74
- Example ISDN Configuration 75
- Configuring ISDN 76
- Getting More Information 77
- Troubleshooting the Router 79
- Isolating Problems 80
- ° F (0to40°C) 80
- Reading the LEDs 81
- Figure A-3 Model 2503 LEDs 82
- Figure A-4 Model 2504 LEDs 82
- Figure A-5 Model 2513 LEDs 82
- Figure A-6 Model 2514 LEDs 83
- Figure A-7 Model 2515 LEDs 83
- Maintaining the Router 85
- Opening the Chassis 86
- Screw Slot 87
- Flat-blade screwdriver 87
- Maintaining the Router B-5 89
- Maintaining the Router B-7 91
- Upgrading the DRAM SIMM 92
- • ESD-preventive wrist strap 94
- • System-code SIMM(s) 94
- System-Code SIMM Replacement 95
- Closing the Chassis 97
- Cable Specifications 99
- Identifying a Roll-Over Cable 100
- Token Ring Port Pinouts 105
- EIA/TIA-232 108
- EIA/TIA-449 111
- <— indicates DCE to DTE 114
- Multiport Serial Routers 123
- Safety Recommendations 124
- General Site Requirements 125
- Site Environment 126
- Preventive Site Configuration 126
- Configuring Equipment Racks 127
- Power Supply Considerations 127
- Installation Checklist 129
- Creating a Site Log 130
- Cabling Considerations 130
- Distance Limitations 131
- Console Port Connections 133
- Auxiliary Port Connections 133
- Ethernet Connections 134
- Token Ring Connections 134
- BRI Connections 136
- Inspecting the System 137
Verwandte Produkte und Handbücher für Vernetzung Cisco 2513
Vernetzung Cisco WS-X4991 Bedienungsanleitung
(15 Seiten)
(15 Seiten)
Vernetzung Cisco WRT54GC Bedienungsanleitung
(69 Seiten)
(69 Seiten)
Vernetzung Cisco DPC 3925 Bedienungsanleitung
(116 Seiten)
(116 Seiten)
Vernetzung Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router Bedienungsanleitung
(116 Seiten)
(116 Seiten)
Vernetzung Cisco WMP54G Betriebsanweisung
(25 Seiten)
(25 Seiten)
Vernetzung Cisco Ethernet switch Betriebsanleitung
(266 Seiten)
(266 Seiten)
Vernetzung Cisco CB20A Technical Information
(24 Seiten)
(24 Seiten)
Vernetzung Cisco DPC3010 Bedienungsanleitung
(40 Seiten)
(40 Seiten)
Steelcraft-automotive 52330 GRILL GUARD manuály
Uživatelské manuály a uživatelské příručky pro Pro auto Steelcraft-automotive 52330 GRILL GUARD.
Poskytujeme 1 manuály pdf Steelcraft-automotive 52330 GRILL GUARD ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Steelcraft automotive 52330 GRILL GUARD Uživatelský manuál (3 strany)
Značka: Steelcraft-automotive | Kategorie: For the car | Velikost: 0.63 MB |
Tabulka s obsahem
Další produkty a příručky pro Pro auto Steelcraft-automotive
| Modely | Typ Dokumentu |
|---|---|
| 50120 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 50120 GRILL GUARD User Manual,
5 stránky
|
| 52190 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 52190 GRILL GUARD User Manual,
2 stránky
|
| 51120 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51120 GRILL GUARD User Manual,
2 stránky
|
| 52250 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 52250 GRILL GUARD User Manual,
5 stránky
|
| 51010 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51010 GRILL GUARD User Manual [es] ,
2 stránky
|
| 52147 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 52147 GRILL GUARD User Manual [es] ,
5 stránky
|
| 51320 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51320 GRILL GUARD User Manual,
3 stránky
|
| 51370 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51370 GRILL GUARD User Manual,
4 stránky
|
| 51020 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51020 GRILL GUARD User Manual,
4 stránky
|
| 51140 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51140 GRILL GUARD User Manual,
2 stránky
|
| 51290 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51290 GRILL GUARD User Manual,
6 stránky
|
| 51360 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51360 GRILL GUARD User Manual,
7 stránky
|
| 51030 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51030 GRILL GUARD User Manual,
4 stránky
|
| 51260 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51260 GRILL GUARD User Manual,
1 stránky
|
| 51260м GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51260м GRILL GUARD User Manual,
1 stránky
|
| 51390 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51390 GRILL GUARD User Manual,
7 stránky
|
| 51130 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51130 GRILL GUARD User Manual [es] ,
2 stránky
|
| 52267 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 52267 GRILL GUARD User Manual [en] [es] [fr] ,
2 stránky
|
| 51340 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 51340 GRILL GUARD User Manual,
3 stránky
|
| 52020 GRILL GUARD |
Uživatelský manuál
Steelcraft Automotive 52020 GRILL GUARD User Manual [es] ,
1 stránky
|
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern