Cisco 2513 Spezifikationen Seite 135
- Seite / 138
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Preparing to Install the Cisco Multiport Serial Routers 2-13
Network Connection Considerations
attachment unit (MAU). The Token Ring port labeled UTP uses an RJ-45 Token Ring cable
and is connected through an adapter or directly to a MAU. Only one Token Ring port can
be used at a time.
Synchronous Serial Connections
The multiport serial routers offer two high-speed synchronous serial ports and from two to
eight (depending on which chassis you have) low-speed asynchronous/synchronous serial
interface ports that can be configured as synchronous serial interfaces.
The high-speed synchronous serial ports are located on the left of the rear panel and are
labeled SERIAL 0 and SERIAL 1.
The serial ports are 60-pin, D-type connectors. All serial interfaces (except the EIA-530)
can be configured as DTE or DCE, depending on the attached cable. The EIA-530 interface
is only configured as DTE. All DTE serial ports require that external clocking be provided
by a channel service unit/data service unit (CSU/DSU) or other DCE device.
You must use a special serial cable to connect a multiport serial router to a modem or
CSU/DSU. This cable is available from Cisco and is usually ordered with the system. The
cable uses a DB-60 connector on the chassis end. See the appendix “Cisco Multiport Router
Cable Specifications” for cable pinouts. For ordering information, contact a customer
service representative.
Note Because of the small size of the pins on the DB-60 serial connector, attempting to
manufacture your own serial cables is not recommended.
Asynchronous/synchronous Serial Connections
The asynchronous/synchronous serial ports use the asynchronous/synchronous 60-pin
connectors located on the rear panel. The lower ports are labeled SERIAL 2 (A/S) and
SERIAL 3 (A/S): the upper ports (depending on which chassis you have) are labeled
SERIAL 4 (A/S) through SERIAL 9 (A/S).
- About This Guide 1
- Organization 2
- Conventions 2
- Overview of the Router 5
- Hardware Features 6
- Overview of the Router 1-3 7
- Overview of the Router 1-5 9
- System Specifications 10
- Obtaining Service and Support 11
- Cisco Connection Online 12
- Ordering Documentation 13
- ISDN Connections 21
- DTE or DCE 22
- Signaling Standards 24
- Router connections 25
- EIA/TIA-449 V.35 X.21 25
- EIA/TIA-232 EIA-530 25
- EIA/TIA-232 Connections 26
- EIA/TIA-449 Connections 26
- V.35 Connections 27
- X.21 Connections 28
- Where to Go Next 31
- Installing the Router 33
- Required Tools and Equipment 34
- Setting Up the Chassis 35
- Rack-Mounting the Chassis 37
- Wall-Mounting the Chassis 39
- TOKEN RING 41
- DC Power Specifications 42
- Wiring the DC Power Supply 43
- Input: –40– –72V 44
- Current: 1.5–1.0A 44
- Watts: 40W 44
- Connecting to a Network 45
- Installing the Router 3-17 49
- AUX SER 0 ETH 51
- Installing the Router 3-21 53
- Configuring the Router 55
- Configuring the Router 4-3 57
- Configuring the Router 4-5 59
- Configuring the Router 4-9 63
- Configuring the Router 4-11 65
- Using Configuration Mode 66
- Using AutoInstall 67
- Cisco IOS Software Basics 68
- Saving Configuration Changes 71
- Configuring ISDN 72
- SPID_no [LDN] 74
- Example ISDN Configuration 75
- Configuring ISDN 76
- Getting More Information 77
- Troubleshooting the Router 79
- Isolating Problems 80
- ° F (0to40°C) 80
- Reading the LEDs 81
- Figure A-3 Model 2503 LEDs 82
- Figure A-4 Model 2504 LEDs 82
- Figure A-5 Model 2513 LEDs 82
- Figure A-6 Model 2514 LEDs 83
- Figure A-7 Model 2515 LEDs 83
- Maintaining the Router 85
- Opening the Chassis 86
- Screw Slot 87
- Flat-blade screwdriver 87
- Maintaining the Router B-5 89
- Maintaining the Router B-7 91
- Upgrading the DRAM SIMM 92
- • ESD-preventive wrist strap 94
- • System-code SIMM(s) 94
- System-Code SIMM Replacement 95
- Closing the Chassis 97
- Cable Specifications 99
- Identifying a Roll-Over Cable 100
- Token Ring Port Pinouts 105
- EIA/TIA-232 108
- EIA/TIA-449 111
- <— indicates DCE to DTE 114
- Multiport Serial Routers 123
- Safety Recommendations 124
- General Site Requirements 125
- Site Environment 126
- Preventive Site Configuration 126
- Configuring Equipment Racks 127
- Power Supply Considerations 127
- Installation Checklist 129
- Creating a Site Log 130
- Cabling Considerations 130
- Distance Limitations 131
- Console Port Connections 133
- Auxiliary Port Connections 133
- Ethernet Connections 134
- Token Ring Connections 134
- BRI Connections 136
- Inspecting the System 137
Verwandte Produkte und Handbücher für Vernetzung Cisco 2513
Vernetzung Cisco WS-X4991 Bedienungsanleitung
(15 Seiten)
(15 Seiten)
Vernetzung Cisco WRT54GC Bedienungsanleitung
(69 Seiten)
(69 Seiten)
Vernetzung Cisco DPC 3925 Bedienungsanleitung
(116 Seiten)
(116 Seiten)
Vernetzung Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router Bedienungsanleitung
(116 Seiten)
(116 Seiten)
Vernetzung Cisco WMP54G Betriebsanweisung
(25 Seiten)
(25 Seiten)
Vernetzung Cisco Ethernet switch Betriebsanleitung
(266 Seiten)
(266 Seiten)
Vernetzung Cisco CB20A Technical Information
(24 Seiten)
(24 Seiten)
Vernetzung Cisco DPC3010 Bedienungsanleitung
(40 Seiten)
(40 Seiten)
Rubbermaid Commercial Products FG446300BLA manuels
Manuels d'utilisation et guides de l'utilisateur pour Non Rubbermaid Commercial Products FG446300BLA.
Nous fournissons des manuels en pdf 1 Rubbermaid Commercial Products FG446300BLA à télécharger gratuitement par type de document : Manuel d'instructions
Rubbermaid commercial products FG446300BLA Manuel d'instructions (3 pages)
marque: Rubbermaid-commercial-products | Catégorie: No info | Taille: 0.78 MB |
Table des matières
Plus de produits et de manuels pour Non Rubbermaid Commercial Products
| Modèles | Type de document |
|---|---|
| FG513700OWHT |
Manuel d'instructions
Rubbermaid Commercial Products FG513700OWHT Instructions / Assembly,
1 pages
|
| FG9T6000BLA |
Guide d'installation
Rubbermaid Commercial Products FG9T6000BLA Installation Guide,
1 pages
|
| FG9W7300BLA |
Manuel d'instructions
Rubbermaid Commercial Products FG9W7300BLA Instructions / Assembly,
2 pages
|
| FG257088BLA |
Manuel d'instructions
 
Rubbermaid Commercial Products FG257088BLA Instructions / Assembly,
1 pages
|
| FG409500BLA |
Manuel d'instructions
Rubbermaid Commercial Products FG409500BLA Instructions / Assembly,
3 pages
|
| FG778000YEL |
Manuel d'instructions
Rubbermaid Commercial Products FG778000YEL Instructions / Assembly,
2 pages
|
| FG400400ROCK |
Manuel d'instructions
Rubbermaid Commercial Products FG400400ROCK Instructions / Assembly,
4 pages
|
| FG335800CLR |
Manuel d'utilisation et d'entretien
Rubbermaid Commercial Products FG335800CLR Use and Care Manual,
1 pages
|
| FG564200BLA | Manuel d'instructions Rubbermaid Commercial Products FG564200BLA Instructions / Assembly, 2 pages |
| RCP 4486 BLA |
Manuel d'instructions
Rubbermaid Commercial Products RCP 4486 BLA Instructions / Assembly,
3 pages
|
| FG9T7500 BLA |
Manuel d'instructions
Rubbermaid Commercial Products FG9T7500 BLA Instructions / Assembly,
8 pages
|
| FG409400GRAY |
Manuel d'instructions
Rubbermaid Commercial Products FG409400GRAY Instructions / Assembly,
4 pages
|
| FG449000BLA |
Manuel d'instructions
Rubbermaid Commercial Products FG449000BLA Instructions / Assembly,
2 pages
|
| FG780508PLAT |
Manuel d'instructions
  
Rubbermaid Commercial Products FG780508PLAT Instructions / Assembly,
2 pages
|
| FG9T6700BLA |
Manuel d'instructions
Rubbermaid Commercial Products FG9T6700BLA Instructions / Assembly,
2 pages
|
| FG9T5800BLA |
Manuel d'instructions
Rubbermaid Commercial Products FG9T5800BLA Instructions / Assembly,
9 pages
|
| FG618000BLA |
Manuel d'instructions
Rubbermaid Commercial Products FG618000BLA Instructions / Assembly,
4 pages
|
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.037 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern