Cisco 2501 - Router - EN Bedienungsanleitung PDF herunterladen (Seite 8)

186

Chapter 4

Introduction to the Cisco IOS and SDM

The next part shows us that the IOS is being decompressed into RAM:

program load complete, entry point:0x80008000, size:0x43b7fc

Self decompressing the image :

#######################################################################

## [OK]

So far, everything is pretty much the same. Notice below that the IOS version is stated as

version 12.3(20):

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(20), RELEASE

SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Compiled Tue 08-Aug-06 20:50 by kesnyder

Image text-base: 0x80008098, data-base: 0x81A0E7A8

Just as with the 2800 series, once the IOS is loaded, the information learned from the POST

will be displayed:

cisco 2610 (MPC860) processor (revision 0x202) with 61440K/4096K bytes

of memory.

Processor board ID JAD03348593 (1529298102)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

1 Ethernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

2 Serial(sync/async) network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Okay—finally what we see here is one Ethernet interface and three serial interfaces. The

amount of RAM and flash is also displayed, and the above router output shows there are

64MB of RAM and 16MB of flash.

47020.book Page 186 Wednesday, January 2, 2008 4:31 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 75 76

Keine Kommentare

Cisco 2501 - Router - EN Bedienungsanleitung Seite 8