Cisco 1417 - 1417 Router - EN Bedienungsanleitung PDF herunterladen (Seite 2)

Using POTS Splitters and Microfilters

Cisco 1400 Series Router Installation and Configuration Guide

2-2

Warning Only trained and qualiﬁed personnel should be allowed to install or replace this

equipment.

Warning Before working on a chassis or working near power supplies, unplug the power

cord on AC units; disconnect the power at the circuit breaker on DC units.

Warning Before working on equipment that is connected to power lines, remove jewelry

(including rings, necklaces, and watches). Metal objects will heat up when connected to

power and ground and can cause serious burns or weld the metal object to the terminals.

Warning Ultimate disposal of this product should be handled according to all national

laws and regulations.

Warning Before opening the chassis, disconnect the telephone-network cables to avoid

contact with telephone-network voltages.

Warning Do not work on the system or connect or disconnect cables during periods of

lightning activity.

Caution Do not place anything on top of the router that weighs more than 10 pounds

(4.5 kg). Excessive weight on top of the router could damage the chassis.

Using POTS Splitters and Microﬁlters

Note This section applies only to the Cisco 1407 and Cisco 1417 routers.

POTS splitters and microﬁlters are used on telephone lines to ensure voice- and data-call

quality. This section describes splitters and microﬁlters and how and when to use them with

the Cisco 1407 and Cisco 1417 routers. POTS splitters result in the best data and voice

performance when the router and the telephone are used on the same telephone line, and

we recommend that you use a splitter.

1 2 3 4 5 6 7 ... 15 16

Keine Kommentare

Cisco 1417 - 1417 Router - EN Bedienungsanleitung Seite 2