Cisco 1417 - 1417 Router - EN Bedienungsanleitung PDF herunterladen (Seite 10)

Connecting the Router to the ADSL Line

Cisco 1400 Series Router Installation and Configuration Guide

2-10

Step 3 Connect one end of the RJ-11 cable (that you supply) to the ADSL port on the

DSL modem. On the Cisco 625 modem, this is the port labeled LINE.

Step 4 Connect the other end of the RJ-11 cable to the ADSL wall jack.

Note Refer to the documentation that came with the DSL modem if you are not sure which

modem port connects to the router and which port connects to the ADSL line.

Figure 2-6 Connecting the Cisco 1401 Router to the ADSL Line

Cisco 1407 and Cisco 1417 Routers

Follow these steps, and refer to Figure 2-7 to connect the Cisco 1407 and Cisco 1417

routers to the ADSL line:

Step 1 Connect one end of the purple cable to the purple ADSL port on the router.

Step 2 Connect the other end of the purple cable to the ADSL wall jack.

Note If you are connecting the router to a POTS splitter that uses data port pins 3 and 4

for data, you should use the purple cable with the blue stripe. If you are not sure about what

type of POTS splitter to use, contact your ADSL service provider or your Cisco reseller.

RESET

LINE

DATA

POWER

Cisco 1401

CONSOLE

ATM 25

ETHERNET

LNK

OK FLASH PC CARD

12414

ADSL

(RJ-11)

wall jack

DSL modem

Green RJ-45 cable

RJ-11 cable

ATM-25 port

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Cisco 1417 - 1417 Router - EN Bedienungsanleitung Seite 10