Cisco BayTech DS Series Bedienungsanleitung PDF herunterladen (Seite 7)

DS62-MD4 Network/Modem Host Module

Figure 5

Cabling

RJ-45 Cables and Adapters

DS62 EIA-232 RJ-45 Signal

Pin EIA 232

Signal

Direction

Description

1 DTR Out Handshake, Line Driver Inactive State = High: +12V when power is

applied. Used as a handshake line to enable/disable the receiving of

characters.

2 GND Signal Ground

3 RTS Out Handshake, Line Driver Inactive State = High: +12 V when power is

applied. Not used to enable/disable.

4 TX Out Transmit Data Out

5 RX In Receive Data In

6 DSR In Handshake In. –12V when not used.

7 GND Signal Ground

8 CTS In Used as a handshake line to enable/disable the receiving of characters.

Network setup :

Ethernet Address................ 00:C0:48:00:01:FD

IP Address...................... 70.150.140.89

Subnet Mask..................... 255.255.255.224

Default Gateway................. 70.150.140.65

Connection Inactivity Timeout (mins): Disabled

Carriage Return Translation: Enabled

Break Length (msecs): 350

DHCP is Disabled Telnet is Enabled SSH is Enabled

SSH host keys are set to factory default

IP Address........................1

Subnet Mask.......................2

Gateway Address...................3

Inactivity Timeout................4

Carriage Return Translation.......5

Break Length......................6

DHCP Enable/Disable...............7

Telnet Enable/Disable.............8

SSH Enable/Disable................9

SSH Host Key Generation...........10

IP Filter Configuration...........11

SNMP Configuration................12

Web Server Configuration..........13

Exit..............................X,CR

Enter Request :

1 2 3 4 5 6 7 8 9

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco BayTech DS Series Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Netzwerk-Switches Cisco BayTech DS Series