Cisco 1503 Bedienungsanleitung PDF herunterladen (Seite 6)

6 Release Notes for the Cisco 1503 Micro Hub for Software Release 2.01

Documentation Updates

Hub ID Numbers

This section describes the rules that determine the ID number of a particular hub in a stack of hubs.

The hub ID number is used to identify individual hubs in a stack of hubs.

You cannot manually assign an ID number to stacked hub. The ID number is assigned based on how

the hubs are cabled together, not on the particular physical location in the stack itself.

1 The lowest hub ID number in a stack (1) is always assigned to the hub with another hub

connected to its OUT port and with no device connected to its IN port.

2 The highest hub ID number in a stack (any number from 2 to 5) is always assigned to the hub

with no device connected to its OUT port and with another hub connected to its IN port.

Figure 1 illustrates these rules.

Figure 1 Hub ID Numbers in a Stack of Micro Hubs

OUT STACKCONNECT IN

Hub ID = 1

Hub ID = 2

Hub ID = 3

Hub ID = 2

Hub ID = 1

H11447

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Cisco 1503 Bedienungsanleitung Seite 6