4 Release Notes for the Cisco 1503 Micro Hub for Software Release 2.01
Documentation Updates
Resolved Caveats—Release 1.15
This section describes problems in release 1.09 that have been resolved in release 1.15.
IP Addressing
The IP address assigned to the hub by using the bootp-get-ip option of the bootup-option command
will be used by the hub, unless it is overwritten by using the ip address command to enter a different
IP address.
Corrupted EEPROM
The electrically erasable programmable ROM (EEPROM) does not become corrupted when
rebooting the hub. EEPROM corruption results in unexpected hub behavior.
Port “Partition” LED Messages
The front-panel LEDs no longer indicate that a port has been partitioned when it has not.
Incoming ARP Processing
Incoming Address Resolution Protocol (ARP) packets are processed correctly.
Documentation Updates
This section contains changes to the Cisco Micro Hub User Guide that came with your hub.
Software Documentation Changes
Table 1 lists the changes to software-related information in the user guide.
Table 1 Corrections to the Cisco Micro Hub User Guide
Page Section Correction
3-2 Connection Using Telnet You do not have to restart the hub after setting or resetting the hub with an IP address. The hub will
dynamically recognize a new or changed IP address.
3-6 Configuring the Hub The second item in this section should read as follows:
• “IP address for the BOOTP server, if you want to use the BOOTP feature.”
3-6 Configuring the Hub An additional item should be added to the list of information that you should have available before
configuring the hub:
• “IP address for the TFTP server, if you want to use the TFTP bootup feature.”
3-20 bootup-option The factory default for the bootup-option command is bootp-get-ip, which configures the hub to
obtain its IP address from the local BOOTP server. The bootup-option configuration is stored in the hub
Flash memory.
3-22 start tftp-download The status of the firmware download is not displayed on the terminal or PC screen when you enter the
start tftp-download command.
(9 Seiten)
(298 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern