
Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 6
Voice features
●
SIP version 2
●
Dual-tone multifrequency (DTMF) tone detection and generation
●
Voice Activity Detection (VAD)
●
Comfort Noise Generation (CNG) compatible
●
Silence suppression
●
Call waiting, call waiting caller ID (FXS ports only)
●
Caller ID with name/ number
●
Caller ID blocking
●
Call forwarding: no answer, busy, all
●
Do not disturb
●
Call transfer, call return, call back on busy
●
Fax: G.711 pass-through or real-time fax over IP via T.38 fax relay
(T.38 support is dependent on fax machine and network/transport resilience)
●
Supports multiple voice codecs: G.711a, G.711u, G.726,G.729A, G.723.1
●
SIP over TLS
●
Three-way conference calling with local mixing
●
Per-call authentication and associated routing
●
Call blocking with toll restriction
●
Delayed disconnect
●
Distinctive ringing: calling and called number
●
Off-hook warning tone
●
Selective/anonymous call rejection
●
VoIP to PSTN (USA) service call origination and termination
●
PSTN (USA) to VoIP service call origination and termination
●
Forward calls to VoIP service: selective, authenticated, all
●
Forward calls to PSTN service: selective, authenticated, all
●
Automatic PSTN fallback (loss of power or IP service to unit, with quiescence to normal operations): fixed
fallback pairing of FXS ports to FXO ports
●
Advanced inbound and outbound call routing
●
Independent configurable dial plans (1 per port)
●
Force PSTN disconnection
FXO behavior features
●
PSTN answer delay timer
●
PSTN-to-VoIP call max duration timer
●
VoIP-to PSTN call max duration timer
●
PSTN dialing delay timer
●
VoIP dialog refresh interval timer
●
PSTN ring time-out timer
International control features
●
FXO port impedance: configurable to 16 settings
●
Ring frequency: configurable
●
SPA to PSTN and PSTN to SPA gain settings
●
Ring frequency: maximum setting
●
Ring validation time setting
●
Tip/ring voltage adjustment setting
●
Ring indication delay setting
●
Operational loop current minimum value
●
Ring time-out setting
●
On-hook speed setting
●
Ringer impedance setting
●
Line-in-use voltage setting
Security
●
Password-protected system reset to factory default
●
Password-protected administrator and user access authority
●
Provisioning/configuration/authentication: HTTPS with factory-installed client certificate
●
HTTP digest-encrypted authentication via MD5 (RFC 1321)
●
Authentication: Extensible Authentication Protocol TLS (EAP-TLS), EAP Tunneled TLS (EAP-TTLS), and
Protected EAP (PEAP)
●
SIP over TLS
●
Up to 256-bit Advanced Encryption Standard (AES) encryption
Kommentare zu diesen Handbüchern