Cisco DMP100 Betriebsanweisung PDF herunterladen (Seite 24)

2. Field calibration

(1)

(2)

Image 2-16

Show frame position information

3. And on the LED wall, this selected frame is also outline colored

Image 2-17

Show frame position on LED screen

Use “Select Frame” to make sure the desired frame is selected before modifying it.

LMT Data

”LMT Data” shows the LMT brightness Y and color coordinates x, y of the selected frame.

• Read

Press “Read”, the LMT data

x, y, Y of Red, Green and Blue will be shown in the table

• Modify

Input new brightness value Y in the text “Y (Modify)”and press “Modify”, the new LMT data will be set to the frame.

• Calibration S imulate

The “simulate” is to do calibration for the selected tile on LED wall with the new LMT brightness data.

Input new LMT brightness value in “Y (modify)”, select the wanted calibration way in the radio box (Only white balance or RGB

+ white balance). Press “Simulate” and view the calibration result on the LED wall

R59770395 FIELD CALIBRATION SOFTWARE (FCS-100) 08/05/09

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

Keine Kommentare

Cisco DMP100 Betriebsanweisung Seite 24