Cisco DMP100 Betriebsanweisung PDF herunterladen (Seite 6)

1. concept and installation

1.1 Basic concept

Different steps to be taken

1. Swap the new frame. Follow the service manual for more detail about changing a frame on site.

2. Conﬁgure and adjust the wall with Director Toolset

3. Calibrate the wall with Director Toolset, use the desired calibration level

4. Display a white image and view it. If there is still different in uniformity, install FCS-100 software on controller PC.

5. Connect controller PC with digitizer (D-320, DMP-100, or DX-700) and use Field Calibration to correct the un-uniformed

tiles/frames

Preparations

For D-320 or DMP-100 based digitizerA serial line to connect controller PC w ith digitizer

For DX-700 based digitizerA network cable to connect controller PC w ith digitizer

R59770395 FIELD CALIBRATION SOFTWARE (FCS-100) 08/05/09

1 2 3 4 5 6 7 8 9 10 11 ... 37 38

Keine Kommentare

Cisco DMP100 Betriebsanweisung Seite 6