Cisco ME 3800X Spezifikationen PDF herunterladen (Seite 204)

100

101

2-182

Cisco ME 3800X and ME 3600X Switch Command Reference

OL-23401-02

Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands

network-clock hold-off

To configure the time that the switch waits when a SyncE reference clock goes down before removing it

as the network clock, use the network-clock hold-off command in global configuration mode. To return

to the default value, use the no form of this command.

network-clock hold-off value

no network-clock hold-off value

Syntax Description

Defaults The default hold-off time is 300 ms.

Command Modes Global configuration

Command History

Usage Guidelines Setting a hold-off timeout ensures that the short activation of a signal failure is not passed to the clock

selection process.

Examples The following example shows how to set the hold-off time.

Switch# config t

Switch(config)# network-clock hold-off 1000

Related Commands

value Sets the time in milliseconds. The accepted values are:

• 50 to 10000 milliseconds (ms) – The timeout value.

The default is 300 ms.

• 0 = Hold-off disable

Release Modification

15.1(2)EY This command was introduced.

Command Description

show network-clocks Displays network clock configuration.

show network-clock

synchronization

Displays network clock configuration.

controller BITS

commands

Configures the BITS clock controller characteristics.

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 621 622

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco ME 3800X Spezifikationen Seite 204

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco ME 3800X