Cisco WUSB600N Betriebsanweisung PDF herunterladen (Seite 10)

Chapter 3

Advanced Configuration

Wireless-N USB Network Adapter with Dual-Band

5. The Adapter connects to the network.

Connecting to the Network via Wi-Fi Protected Setup

NOTE: If the connection cannot be set up, the

message, “Registration failed” appears. If this

happens, use one of two options:

• Push Button Press the router’s Wi-Fi

Protected Setup button until an LED

lights up. Then click Connect to try again.

• PIN Click Skip, and then go to Enter the

Adapter’s PIN Number, page 7.

6. The Connected to Your Network screen appears. To

save your network’s settings, select Remember this

network. (Saving a network’s settings will make it

easier to reconnect

to the network.)

Click Finish to

exit the Wireless Manager.

Connected to Your Network

Congratulations! The Adapter is connected to

the network.

Enter the Adapter’s PIN Number

Enter the PIN Number

1. Access the web-based utility of the router. (Refer to the

router’s documentation for instructions.)

2. On the router’s Wi-Fi Protected Setup screen, enter

the Adapter’s PIN number in the appropriate field.

Then perform the appropriate action to save the PIN

number; for example, click Register. (Refer to the

router’s documentation for instructions.)

NOTE: Enter the Adapter’s PIN number without

the hyphen.

3. The Adapter connects to the network, and the

Connected to Your Network screen appears. To save

your network’s settings, select Remember this

network. (Saving a network’s settings will make it

easier to reconnect

to the network.)

Click Finish to exit

the Wireless Manager.

Connected to Your Network

Congratulations! The Adapter is connected to

the network.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco WUSB600N Betriebsanweisung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Netzwerkkarten Cisco WUSB600N