Cisco CSACSE-1113-K9 Datenblatt PDF herunterladen (Seite 5)

Regulatory Compliance and Safety Information for the Cisco Secure ACS Solution Engine Release 4.0

78-17259-02

Preparing Your Site for Installation

This section describes the requirements your site must meet for safe installation

and operation of your Cisco Secure SE 1113. Ensure that your site is prepared

properly before beginning installation.

Environmental

When planning your site layout and equipment locations, take the following

precautions to help prevent equipment failures and reduce the possibility of

environmentally caused shutdowns. If you are experiencing shutdowns or

unusually high errors with your existing equipment, these precautions will help

you isolate the cause of failures and prevent future problems:

• Always follow the electrostatic discharge prevention procedures described in

the Installation and Setup Guide for Cisco Secure ACS Solution Engine to

avoid damage to equipment. Damage from static discharge can cause

immediate or intermittent equipment failure.

• Ensure the chassis cover is secure. The chassis is designed to allow cooling

air to flow effectively within it. An open chassis allows air leaks, which could

interrupt and redirect the flow of cooling air from internal components.

• Electrical equipment generates heat. Ambient air temperature might not be

adequate to cool equipment to acceptable operating temperatures without

adequate circulation. Ensure that the room in which you operate has adequate

air circulation.

Choosing a Site for Installation

Warning

This unit is intended for installation in restricted access areas. A restricted

access area can be accessed only through the use of a special tool, lock and

key, or other means of security.

• Choose a site with a dry, clean, well-ventilated and air-conditioned area.

• Choose a site that maintains an ambient temperature of 32 to 95°F (0 to

35°C).

1 2 3 4 5 6 7 8 9 10 ... 81 82

Keine Kommentare

Cisco CSACSE-1113-K9 Datenblatt Seite 5