Cisco TelePresence Video Communication Server Betriebsanweisung PDF herunterladen (Seite 6)

Configuring the Cisco VCS

This deployment guide assumes that the Cisco VCS is accessible on an IP network and has had a

basic configuration implemented. This means that the Cisco VCS has been configured with:

 IP details

 DNS details

 NTP server details

Note: Brief instructions on how to carry out this configuration is available in ‘Appendix 1 – Basic Cisco

VCS configuration’ on page 18.

If the system is required to support calling to non-registered endpoints, a DNS zone should be

configured together with a search rule that sends any calls to it that are not for the Cisco VCS’s local

SIP domain.

Firewall ports

If the Cisco VCS is placed in a DMZ, to enable SIP calls to be received the following IP ports must be

open to the Cisco VCS through the firewall:

 5060 (if basic SIP connection is required)

 5061 (for SIP over TLS)

 50000 to 52399 (for media)

Check option key

 Ensure that Starter Pack is enabled: check that the Starter Pack option key is listed on the

Option keys page (Maintenance > Option keys):

Cisco VCS Deployment Guide: Cisco VCS Expressway Starter Pack (X5.1) Page 6 of 28

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Keine Kommentare

Cisco TelePresence Video Communication Server Betriebsanweisung Seite 6