Cisco AS5300 - Universal Access Server Bedienungsanleitung PDF herunterladen (Seite 6)

"T1/PRI and E1/PRI Cards" in the Cisco AS5300 Universal Access Module Installation Guide

for details.

Cables are not included with the card. However, cable specifications and port pinouts are listed

in the appendix, "."

Octal T1/PRI and E1/PRI Cards

You can install an Octal E1/PRI or T1/PRI card () in any slot of the access server chassis. The

board provides 8 RJ-45 T1 or E1 PRI ports and 4 serial interfaces for backhaul WAN support.

Note that these cards do not support Microcom modems.

Note If you are installing an Octal card on a Cisco AS5300 chassis you already have, you will

need to upgrade the DRAM to 64 MB. You can order the memory upgrade (part number 15-

1509-01).

Figure 1-6 Octal T1/PRI or E1/PRI Card

The T1/PRI ports are configured as 100-ohm per port. For the Octal E1/PRI WAN card, the eight

ports can be configured as 75- or 120-ohm lines. The factory-set default is 120-ohm. Note that,

unlike the Quad E1/PRI card, the Octal E1/PRI card does not include a rotary switch to choose

the input impedence for the ports; you change the impedence using a software command. See the

chapter "T1/PRI and E1/PRI Cards" in the Cisco AS5300 Universal Access Module Installation

Guide for details.

Cables are not included with the card. However, cable specifications and port pinouts are listed

in the appendix, "."

MICA Cards

You can install up to two MICA cards in any unpopulated slot of the access server chassis.

Figure 1-7 MICA Card

Each MICA card includes 10 slots in which you can install 6- or 12-port modem modules.

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

Cisco AS5300 - Universal Access Server Bedienungsanleitung Seite 6