Cisco AS5200 - Universal Access Server Bedienungsanleitung PDF herunterladen (Seite 12)

2 Install the Universal Access Server (continued)

Connect a Modem for Remote

Administrative Access

(Optional)

To conﬁgure the access server from a remote

location, you will need an RJ-45-to-RJ-45 rollover

cable and a modem adapter (RJ-45-to-DB-25) to

connect a modem.

If you will not be using a modem to conﬁgure the

access server remotely, skip this procedure and go to

the next page.

Note: The cable and adapter are included. The

modem is not included.

Step 1 Connect the adapter labeled MODEM to

your modem.

Step 2 Connect the RJ-45-to-RJ-45 rollover

cable to the adapter.

Step 3 Connect the other end of the

RJ-45-to-RJ-45 rollover cable to the port

labeled AUX on the rear panel of the

access server.

H10341

Universal access server

RJ-45-to-RJ-45

rollover cable

Auxiliary port (RJ-45)

(labeled AUX)

Modem

RJ-45-to-DB-25 adapter

(labeled MODEM)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Cisco AS5200 - Universal Access Server Bedienungsanleitung Seite 12