Cisco 500 Series Bedienungsanleitung PDF herunterladen (Seite 7)

Data Sheet

Feature

Description

Layer 2 Switching

Spanning Tree Protocol

Standard 802.1d Spanning Tree Support

Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default

Multiple spanning tree instances using 802.1s (MSTP). 16 instances are supported

Port grouping/link

aggregation

Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)

●

Up to 32 groups

●

Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad LAG

VLAN

Support for up to 4096 VLANs simultaneously Port-based and 802.1Q tag-based VLANs MAC-based

VLAN

Management VLAN

PVE (Private VLAN Edge), also known as Protected Port, with multiple uplinks

Guest VLAN Unauthenticated VLAN Protocol-based VLAN CPE VLAN

Dynamic VLAN assignment via Radius server along with 802.1x client authentication

Voice VLAN

Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of

QoS. Auto voice capabilities deliver network-wide zero touch deployment of voice endpoints and call

control devices.

Multicast TV VLAN

Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers

remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR).

Q-in-Q

VLANs transparently cross over a service provider network while isolating traffic among customers.

GVRP/GARP

Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable

automatic propagation and configuration of VLANs in a bridged domain.

Unidirectional Link

Detection (UDLD)

UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or port faults

to prevent forwarding loops and blackholing of traffic in switched networks

DHCP Relay at Layer 2

Relay of DHCP traffic to DHCP server in a different VLAN. Works with DHCP Option 82.

IGMP (versions 1, 2, and 3)

snooping

Internet Group Management Protocol (IGMP) limits bandwidth-intensive multicast traffic to only the

requesters; supports 1K (1024) and 4K (for SG500X in native mode) multicast groups (source-specific

multicasting is also supported).

IGMP querier

IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a

multicast router.

HOL blocking

Head-of-line (HOL) blocking.

Jumbo Frames

Frames up to 9K (9216) bytes in length.

Layer 3

IPv4 routing

Wirespeed routing of IPv4 packets

Up to 2K (2048) static routes and up to 256 IP interfaces

Wirespeed IPv6 Static

Routing

Up to 2K (2048) static routes and up to 128 IPv6 interfaces

Layer 3 Interface

Configuration of layer 3 interface on physical port, LAG, VLAN interface or Loopback interface

CIDR

Support for Classless Inter-Domain Routing

RIP v2 (on 500X)

Support for Routing Information Protocol version 2, for dynamic routing

VRRP (on 500X)

Virtual Router Redundancy Protocol (VRRP) delivers improved availability in a Layer 3 network by

providing redundancy of the default gateway servicing hosts on the network. VRRP versions 2 and 3 are

supported. Up to 255 virtual routers are supported.

DHCP Server

Switch functions as an IPv4 DHCP Server serving IP addresses for multiple DHCP pools/scopes

Support for DHCP options

DHCP Relay at Layer 3

Relay of DHCP traffic across IP domains.

User Datagram Protocol

(UDP) Relay

Relay of broadcast information across Layer 3 domains for application discovery or relaying of

BOOTP/DHCP packets.

Stacking

Hardware stack

Up to 8 units in a stack. Up to 416 ports managed as a single system with hardware failover.

High availability

Fast stack failover delivers minimal traffic loss.

Plug-and-play stacking

configuration/management

Master/backup for resilient stack control

Auto-numbering

Hot swap of units in stack

Ring and chain stacking options Auto stacking port speed Flexible stacking port options

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco 500 Series Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Cisco 500 Series