Cisco SOHO 97 Installationsanleitung PDF herunterladen (Seite 34)

Chapter 2 Installation

Installing the Router

2-10

Cisco 837 Router and SOHO 97 Router Hardware Installation Guide

78-14781-02

Perform the following steps to mount the router on the wall:

Step 1 Secure two screws 7 5/8 inches (19.35 cm) apart into a wall and 1/8 inch (0.32 cm)

from the wall.

Step 2 Hang the router on the screws as shown in Figure 2-3.

Step 3 Place the power supply on a horizontal surface.

Installing the Router

To install the router, you need to perform the following tasks in the following

order:

1. Connect the Ethernet devices to the router.

2. Connect the ADSL line.

3. Connect a terminal or PC to the router for software configuration using the

command-line interface (CLI) or for troubleshooting.

4. Connect the router to the power source.

5. Verify the links, using the router LEDs.

1 Two number-six, 3/4-in.

screws

5 Maximum distance between the

router and the power supply

(6 ft [1.8 m])

2 Distance between the two

screws (7 5/8 in. [19.35 cm])

6 Horizontal surface for placing

the power supply.

3 Cisco 837 router 7 Distance between the screw and

the wall (1/8 in. [0.32 cm]).

4 Mounting brackets

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 59 60

Keine Kommentare

Cisco SOHO 97 Installationsanleitung Seite 34