Cisco 828 - 828 Router - EN Installationsanleitung PDF herunterladen (Seite 48)

Appendix A Specifications and Cables

Cabling Specifications

A-4

Cisco 828 Router and SOHO 78 Router Hardware Installation Guide

78-12837-02

The console port is configured as a data communications equipment (DCE)

device. The default parameters for the console port are as follows:

• 9600 baud

• 8 data bits

• No parity

• One stop bit

Cabling Specifications

This section provides specifications for the following types of Ethernet cables,

which you might need to provide:

• Straight-through

• Crossover

This section also provides information on Ethernet cable distance limitations.

Ethernet Cable Specifications

Table A-4 provides the specifications for straight-through and crossover Ethernet

cables. See the Glossary for definitions for straight-through and crossover

Ethernet cables.

Table A-4 Ethernet Cable Specifications

Type Category Shielding

10BaseT Category 3 or 5 Shielded twisted-pair (STP)

10BaseT – Unshielded twisted-pair (UTP)

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 57 58

Keine Kommentare

Cisco 828 - 828 Router - EN Installationsanleitung Seite 48