Cisco WS-X6416-GE-MT - Interface Module - Expansion Installationsanleitung PDF herunterladen (Seite 28)

Chapter 1 Product Overview

Catalyst 6500 Series Switches

1-4

Catalyst 6500 Series Switch Module Installation Guide

78-15725-02

Catalyst 6500 Series Switches

The Catalyst 6500 series switches consist of the following six chassis:

• Catalyst 6503 (3 slots)

• Catalyst 6506 (6 slots)

• Catalyst 6509 (9 slots)

• Catalyst 6509-NEB (9 slots, vertical)

• Catalyst 6509-NEB-A (9 slots, vertical)

• Catalyst 6513 (13 slots)

The Catalyst 6506, Catalyst 6509, Catalyst 6509-NEB, Catalyst 6509-NEB-A,

and Catalyst 6513 switches can support a backplane architecture that scales from

32 Gbps to 256 Gbps. The Catalyst 6503 switch backplane architecture is limited

to 32 Gbps.

The Catalyst 6500 series switches support the following hardware:

• A supervisor engine with two gigabit interface uplinks and an optional

redundant supervisor engine.

Note The Supervisor Engine 720 also has a 10/100/1000 Mbps uplink port.

Both supervisor engines in a single chassis must be completely identical. You

can configure the redundant supervisor engines in a Catalyst 6500 series

switch in one of three configurations:

–

Two supervisor engines, each with no Multilayer Switch Feature Card

(MSFC) and no Policy Feature Card (PFC)

–

Two supervisor engines, each configured with a PFC daughter card

–

Two supervisor engines, each configured with both an MSFC and a PFC

daughter card

Note The Catalyst 6513 switch requires either the Supervisor Engine 2

or Supervisor Engine 720.

• Additional switching modules in any combination:

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 193 194

Keine Kommentare

Cisco WS-X6416-GE-MT - Interface Module - Expansion Installationsanleitung Seite 28