Cisco WS-F6700-DFC3CXL - Distributed Forwarding Card 3CXL Bedienungsanleitung Seite 5

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 7
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 4
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 7
Power requirements
WS-X6708-10G-3C: 444.36W (10.58A @ 42v)
WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V)
WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V)
WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V)
WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V)
WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V)
Go to
http://www.cisco.com/go/powercalculator for easy power consumption calculation
Indicators
Status: green (operational); red (faulty); orange (module booting)
Link: green (port enabled and connected); orange (port disabled); off (port enabled and not connected)
Table 4. Cables for 10GBASE-CX4 Optics
Product ID Product Description
CAB-INF-28G-1= Cisco 1 m CX4 patch cable
CAB-INF-28G-5= Cisco 5 m CX4 patch cable
CAB-INF-28G-10= Cisco 10 m CX4 patch cable
CAB-INF-26G-15= Cisco 15 m CX4 patch cable
ORDERING INFORMATION
Table 5. Product Numbers for Ordering
Product ID Product Description
WS-X6708-10G-3C Cisco Catalyst 6500 8-Port 10 Gigabit Ethernet Module with DFC3C, requires X2
WS-X6708-10G-3CXL Cisco Catalyst 6500 8-Port 10 Gigabit Ethernet Module with DFC3CXL, requires X2
X2-10GB-SR 10GBASE-SR X2 (multimode fiber)
X2-10GB-LR 10GBASE-LR X2 (single-mode fiber)
X2-10GB-ER 10GBASE-ER X2 (single-mode fiber)
X2-10GB-LX4 10GBASE-LX4 X2 (multimode fiber)
X2-10GB-CX4 10GBASE-CX4 X2 (copper Infiniband cable)
WS-X6704-10GE Cisco Catalyst 6500 4-Port 10 Gigabit Ethernet Module, requires XENPAK
WS-F6700-DFC3BXL Distributed Forwarding Card-3BXL Upgrade for WS-X6704-10GE
WS-F6700-DFC3B Distributed Forwarding Card-3B Upgrade for WS-X6704-10GE
WS-F6700-DFC3A Distributed Forwarding Card-3A Upgrade for WS-X6704-10GE
XENPAK-10GB-SR 10GBASE-SR XENPAK (multimode fiber)
XENPAK-10GB-LR 10GBASE-LR XENPAK (single-mode fiber)
XENPAK-10GB-ER 10GBASE-ER XENPAK (single-mode fiber)
XENPAK-10GB-LX4 10GBASE-LX4 XENPAK (multimode fiber)
XENPAK-10GB-CX4 10GBASE-CX4 XENPAK (copper Infiniband cable)
CAB-INF-28G-1= Cisco 1 m CX4 patch cable for XENPAK-10GB-CX4
CAB-INF-28G-5= Cisco 5 m CX4 patch cable for XENPAK-10GB-CX4
CAB-INF-28G-10= Cisco 10 m CX4 patch cable for XENPAK-10GB-CX4
CAB-INF-26G-15= Cisco 15 m CX4 patch cable for XENPAK-10GB-CX4
XENPAK-10GB-ZR 10GBASE-ZR XENPAK (single-mode fiber)
DWDM-XENPAK-xx.yy DWDM XENPAK, where xx.yy ranges from 30.33 to 60.61 (single-mode fiber)
WDM-XENPAK-REC RX only XENPAK (single-mode fiber)
XENPAK-10GB-LW 10GBASE-LW XENPAK (single-mode fiber) (WAN PHY)
Seitenansicht 4
1 2 3 4 5 6 7

Kommentare zu diesen Handbüchern

Keine Kommentare