Cisco WRT610N Bedienungsanleitung PDF herunterladen (Seite 3)

SETUP WRT610N ROUTER and Update firmware

1. Check the firmware version of your router. Firmware Version: ________________________

2. Go to update website: http://homesupport.cisco.com/en-us/support/routers/WRT610N

3. Select hardware version-2 and select firmware update (check the bottom of the router Firmware

Version:___________________

4. If newer download update

5. Watch firmware upgrade video and take notes.

6. Plug in the power cable and plug it into the AC outlet. Do not connect the CAT5 cables yet.

7. Once it powers up, hold the reset button for a few seconds until the power light starts to blink. and

release the reset button.

8. Once it powers up completely, plug your computer to the router with a CAT5 cable.

9. Log into the router. Upload the new firmware (procedure in video).

10. After the upload is complete, unplug the power cable from the router, wait a few seconds, then

plug it back it.

11. Start the Wireless configurations using the manual configurations (not the auto mode)

12. Set 2.5Ghz band for B-G only, to the channel assigned by the instructor (1, 6 or 11) and no

encryption.

13. Set 5Ghz band for N only and no encryption.

14. Disconnect the CAT5 cable, and try connecting to the N-wireless (do not connect to G. this is for

testing purposes) Once your pc connects to the N network wirelessly, log into the router

wirelessly.

15. On your computer, open up the Wireless Network Connection Status window. Leave this window

open at all time so you can see the connection speed

16. Log into the router via wireless N.

17. Go to Wireless Advanced section. Band: do not set AUTO on the band. Start off with 40Mhz.

18. Pick the channel assigned by the instructor

1 2 3

Keine Kommentare

Cisco WRT610N Bedienungsanleitung Seite 3