Cisco Universal Broadband Router uBR7200 Installationsanleitung PDF herunterladen (Seite 72)

Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration

78-6030-03

Command Reference

clear radio interface radio link-metrics

Use this command in privileged EXEC mode to clear all physical layer metrics associated with the radio

interface.

clear radio interface radio slot/port link-metrics

Note To keep physical layer and protocol layer statistics consistent, Cisco recommends that a clear

interface radio slot/port command be entered to also clear the protocol layer statistics.

Syntax Description

Example

The following command clears all radio link-metrics details:

UBR04 # clear radio interface radio 6/0 link-metrics

Troubleshooting

These commands normally are used only by technical support personnel to gain the information needed

to troubleshoot a system:

• show controllers radio—To display attributes of a wireless modem card

• radio histogram—To configure a histogram collection specification

• radio byteErrorHist—To set the histogram collection interval for uncorrected codewords

• show interfaces radio (histspec)—To display the details of the histogram specifications

• show interfaces radio (histdata)—To display the collected histogram data

• debug radio—To set debug commands and display current debug settings

• radio image-add—To add a specified image to the image repository

• radio image-move—To move a specified image to the beginning of the repository list

• show interfaces radio (imagehdr)—To display details of the images to be downloaded

• show radio repository—To display the protocol-specific list of images in the repository

• radio snapshot—To capture a specified amount of data from the wireless modem card

• radio scope-output—To configure a DSP to send an identified type of output to the serial port for

analysis

• radio timeline—To collect a sequence of data values for a specified attribute

• show interfaces radio (tlspec)—To display timeline specifications

• show interfaces radio (tldata)—To display timeline data

slot Positive integer representing the Cisco uBR7200 series slot number.

port Positive integer representing the port number on that slot.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 125 126

Keine Kommentare

Cisco Universal Broadband Router uBR7200 Installationsanleitung Seite 72