Cisco SCE 2000 4xGBE Spezifikationen PDF herunterladen (Seite 157)

100

101

2-121

Cisco SCE 2000 and SCE 1000 CLI Command Reference

OL-26797-03

Chapter 2 CLI Command Reference

interface gigabitethernet

Enters GigabitEthernet Interface Configuration mode to configure a specified Gigabit Ethernet line

interface. To configure a management port, use the interface mng command.

interface gigabitethernet slot-number/interface-number

Syntax Description

Command Default This command has no default settings.

Command Modes Global configuration

Command History This table includes the following release-specific history entries:

Usage Guidelines Use this command to configure the line ports for an SCE 2000 4xGBE or SCE 1000 2xGBE platform.

This command is not used for configuring the management ports.

• To return to the Global Configuration Mode, use the exit command.

• To return to the Use Exec authorization level, use the end command.

The SCE 1000 platform uses line ports 1-2 and the SCE 2000 platform uses line ports 1-4.

The system prompt changes to reflect the GigabitEthernet Interface Configuration mode.

Authorization: admin

Examples The following example enters into GigabitEthernet Configure Interface Mode to configure line port 1.

SCE>enable 10

Password:<cisco>

SCE#config

SCE(config)#interface gigabitethernet 0/1



SCE(config if)#

slot-number Enter a value of 0.

interface-number The GigabitEthernet line interface number.

• SCE 2000 4xGBE platform: Enter a value between 1 and 4

• SCE 1000 2xGBE platform: Enter a value of either 1 or 2

Release Modification

2.5.7 This command was introduced.

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 603 604

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco SCE 2000 4xGBE Spezifikationen Seite 157

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco SCE 2000 4xGBE