Cisco SCE 2000 4/8xFE Bedienungsanleitung PDF herunterladen (Seite 14)

RELEASE SCOS 2.5.6

Release Notes for Cisco Service Control Operating System (SCOS) 2.5.10

OL-7085-08

Anonymous Subscriber Pull Rate Limit Failure

The pull rate limit mechanism fails to limit anonymous subscribers spawning rate. The failure

may cause loss of the pull messages and lack of subscriber resolution in the pull mode.

This issue is fixed in SCOS 2.5.7.

SCE 2000 4/8xFE Issues

Various platform-related issues in SCE 2000 4/8xFE were fixed in SCOS 2.5.7.

SCE 2000 4/8xFE should not be used with SCOS 2.5.5 or SCOS 2.5.6 due to issues related to

the support of SCE 2000 4/8xFE in these SCOS releases.

These issues were fixed in SCOS 2.5.7.

SCE 2000 4/8xFE should be used with SCOS 2.5.7 or with future SCOS releases.

RELEASE SCOS 2.5.6

Inject after packets with short TCP header

SCEs that were running earlier SCOS releases failed to inject packets triggered by the

reception of TCP packets with a header smaller than 20 bytes. In those circumstances, sanity

checks caused a reboot of the SCE.

This issue is fixed in SCOS 2.5.6.

Incorrect counting in the tpServiceLoss MIB-Object

The counting in the tpServiceLoss MIB-Object was incorrect.

This issue is fixed in SCOS 2.5.6.

Missing CLI command

The CLI command for enabling sniffing mode on the SCE2000-4/8xFE was missing. The CLI

command was added in 2.5.6. This CLI command is:

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Keine Kommentare

Cisco SCE 2000 4/8xFE Bedienungsanleitung Seite 14