Cisco SCE 1000 and Technical Information PDF herunterladen (Seite 17)

Connect the AC-Input Power Supply Unit

Figure 11: Connecting the AC Power

Step 1 Plug the AC-input power cable into the AC-input power receptacle on the AC-input power supply

Note

For AC-input power, we recommend powering the SCE 1000 platform from a 120 VAC, 15A receptacle U.S. (240 VAC,

10A international) at the power source.

15 A branch circuit protection is recommended.

Step 2 Plug the AC power supply cable into the AC power source.

Step 3 Turn the on/off switch to the on (⏐) position.

Step 4 Look at the IN and OK LEDs on the power supply unit and the corresponding Power LED on the front panel. If

the AC-input power supply unit is operating properly, these LEDs will be glowing green.

Step 5 Ensure that the power supply is properly aligned and the installation screw is tightened.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

Keine Kommentare

Cisco SCE 1000 and Technical Information Seite 17