Cisco SCE 1000 2xGBE Betriebsanweisung Seite 388

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 490
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 387
Appendix A
Privileged Exec Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
A-118 OL-7117-02
show snmp MIB mib variables
Displays MIB variables.
Authorization admin
Mode Privileged EXEC
P
ARAMETERS
mib Name of MIB to display. Only a value of MIB-II is supported.
variables Name of group to display. Use one of the following values: AT,
ICMP, interfaces, IP, SNMP, system, TCP or UDP.
E
XAMPLE:
The following example shows the MIB-2 system group.
SCE 1000# show snmp MIB MIB-II system
sysDescr.0 = CiSco Service Engineering, SW version: Control Card Version
1.30 build 29, HW version: SCE 1000 GE “RevE”
sysObjectID.0 = 1.3.6.1.4.1.5655.1.2
sysUpTime.0 = 14 hours, 25 minutes, 59 seconds
sysContact.0 = [email protected]
sysName.0 = SCE 1000
sysLocation.0 = London_Office
sysServices.0 = 2
SCE 1000#
show snmp traps
Displays the SNMP traps generation status (enabled/disabled).
Authorization admin
Mode Privileged EXEC
E
XAMPLE:
The following example shows the SNMP server traps status.
SCE 1000#show snmp traps
Authentication Trap Status: Enabled
Enterprise Trap Status: Enabled
SCE 1000#
Seitenansicht 387
1 2 ... 383 384 385 386 387 388 389 390 391 392 393 ... 489 490

Kommentare zu diesen Handbüchern

Keine Kommentare