Cisco ONS 15327 Spezifikationen PDF herunterladen (Seite 15)

Cisco ONS 15327 Product Overview, R3.3

June 2002

Cisco ONS 15327 Product Overview

Cisco Transport Controller

Figure 15 Creating circuits with the CTC Circuit Creation dialog box

The ONS 15327 automatically calculates the best path and STS/VT to use

between these two nodes. It sets up all the cross-connects in each of the ONS

15327 nodes along the circuit path. You can select the circuit type, bidirectional

or unidirectional status, circuit size, and whether path-protected traffic is

required. You can also route circuits manually, for example to force traffic onto a

particular path. See the “Ethernet” section on page 28 for a description of

Ethernet circuits.

CTC also provides an auto-range feature that prevents you from needing to

individually build circuits of the same type. Specify the number of circuits you

need, create one circuit, and CTC automatically creates additional sequential

circuits.

Auto Range

CTC provides an auto-range feature that automatically creates sequential circuits,

which prevents you from needing to individually build circuits of the same type.

Specify the number of circuits you need, create one circuit, and CTC

automatically creates additional sequential circuits.

Detailed Circuit Map

The detailed circuit map provides an end-to-end view of circuits rather than

simply nodes and their spans. Specifically the circuit map shows ports, drops,

spans, and selectors for UPSR circuits.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 49 50

Keine Kommentare

Cisco ONS 15327 Spezifikationen Seite 15