Cisco Network Assistant Bedienungsanleitung PDF herunterladen (Seite 11)

Release Notes for Cisco Network Assistant 5.0 and Later

OL-12210-03

Limitations and Restrictions

• You cannot see the PoE columns in the Port Settings window for Catalyst 4503, 4506, or 4507R

switches that run Cisco IOS 12.2(20)EWA and have a WS-4548, WS-4524, or WS-4506-GB-T PoE

line card.

The workaround is to upgrade the software on the switch to a later version of Cisco IOS.

(CSCeh75133)

Community Limitations

These limitations apply only to communities:

• A community can contain up to 40 devices. This limit is enforced whenever you add devices to a

community.

• Changes to the topology or the network do not propagate across all open Network Assistant sessions

connected to the same community. You see this inconsistency when multiple Network Assistant

sessions are open on one desktop and they are pointing to the same community.

Open one Network Assistant session per desktop per community. (CSCeh53619)

• The Topology view sometimes displays duplicate devices and links. There is no workaround.

(CSCeh61352)

• In the Topology view, the redundant link for an HSRP group is not shown. There is no workaround.

(CSCeh54526)

• If a community has members that are connected to a member through a hub or a Gigastack module,

the Topology view shows all the connections. However, if nonmembers are connected to a

community member through a hub or a Gigastack module, the Topology view shows only the

connection of the first nonmember.

• Accessing a community through a router running NAT (Network Address Translation) is not

supported.

• When a device with a Device ID that exceeds 40 characters is added to the community, its link

disappears. The Device ID is usually the host name, but if a domain name is specified, the Device

ID is in the form hostname.domain-name. There is no workaround, other than to limit the size of the

Device ID to 40 characters or less. (CSCsi77210)

Cluster Limitations

These limitations apply only to clusters:

• When you add a new member with a username and password that is different from the existing

cluster member usernames and passwords, Network Assistant produces an exception error because

of an authentication failure.

The workaround is to add the new member without a username and password. When the new

member is added to the cluster, remove the existing username and password from the Username and

Password fields, enter a new username and password, and then apply it to all cluster members.

(CSCdz07957)

• Changing the password or current authentication while Network Assistant is running causes HTTP

requests to fail.

The workaround is to close all Network Assistant sessions and then to restart it. (CSCeb33995)

• When TACACS authentication is enabled only on a command device, member devices cannot be

configured.

The workaround is to enable TACACS authentication on the member devices. (CSCed27723)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco Network Assistant Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco Network Assistant