Cisco MC3810-V - Concentrator - External Installationsanleitung Seite 22

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 32
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 21
20
Perform Initial Configuration (continued)
Configuring Basic Settings for Serial Ports 0 and 1
To configure basic settings for serial ports 0 and 1, do the following:
Step Command Purpose
1
router> show interface serial
Display the default configuration.
2
router> enable
Enable the configuration.
3
router# configuration
Enter configuration mode.
4
router(config)# network-clock
base-rate {56k | 64k}
Configure the network clock base rate setting.
5
router(config)# interface
serial {0 | 1}
Enter serial interface configuration mode.
6
router(config-if)# clock rate
network-clock
rate
Configure the serial interface phase-lock-loop clock speed. The range is
300 to 2400 kbps. There is no default.
7
router(config-if)# no shutdown
Activate the serial port.
8
Repeat Steps 5 through 7 to configure the other serial port.
9
router(config-if)# exit
Exit interface configuration mode.
10
router(config)# exit
Exit configuration mode.
11
router> show interfaces serial
Display the serial port configuration to verify the new settings.
Seitenansicht 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare