Cisco Ethernet switch Betriebsanleitung PDF herunterladen (Seite 101)

Chapter 6. IBM eServer BladeCenter system initial setup 87

2. Change the TFTP Root Directory to the location of the Cisco switch firmware to be

updated (Figure 6-7).

Figure 6-7 Switch firmware location

3. Click the Security tab and change the TFTP Server to Transmit and Receive files. Click

OK to save. The TFTP Server is now running.

Figure 6-8 TFTP Server Configuration window Security tab

Upgrading code

Use the Management Module graphical interface to start a Telnet session, as described in the

following steps, or if Remote Management is enabled on the external switch ports, open a

Telnet session from an attached workstation’s DOS prompt:

1. Access and log on to the Management Module Web interface, as described in “Accessing

the Management Module Web interface” on page 81.

2. From the I/O Module Tasks menu, click Management. The BladeCenter Management

Module window opens.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 265 266

Keine Kommentare

Cisco Ethernet switch Betriebsanleitung Seite 101